Integrated Surface Roughness Tester Sr110

China Integrated Surface Roughness Tester Sr110, Find details about China Roughness Tester, Surface Roughness Tester from Integrated Surface Roughness Tester Sr110

Model NO.
SR110
Trademark
SADT
Specification
approximately 180g
Origin
China
HS Code
90318090
Model NO.
SR110
Trademark
SADT
Specification
approximately 180g
Origin
China
HS Code
90318090

SR110 of Integrated  surface roughness tester

  • Introduction
The SR110 pocket surface roughness tester is the new generation product. The key features of SR110 are: small size, easy to operate and get measurement results quickly under series manufacturing conditions. SR110 can be widely used to carry out measurements on the surface of metal or nonmetal. The sensor of SR110 was integrated in the tester, which makes the measurements very conveniently.
 
  • Features
  • Parameters: Ra, Rz, Rq, Rt (meets GB/T 3505-2009 standard) ;
  • Apply integrated circuit chips of new types to minimize the volume of the instrument, which makes it easier to carry and work;
  • Using 128×32 dot matrix OLED display, which does not require a backlight
  • Using built-in lithium-polymer battery, no memory effect, it can work while charging, with short charging time and long continuous working time;
  • Good stability with low power;
  • Optimal design on traditional piezoelectric transducers and improve the assembly process to raise the stability significantly;
  • Using probes protection gates which can protect the probes effectively
 
  • Specifications
  • Parameters: Ra, Rz, Rq, Rt (meet GB/T 3505-2009) ;
  • Traverse Length: 6 mm
  • Sampling length (lr): 0.25 mm, 0.80 mm, 2.5 mm
  • Evaluation Length (ln): 1.25 mm, 4.0 mm, 5.0 mm
  • Measuring range: Ra: 0.05μm-10.0μm, Rz: 0.1μm-50μm
  • Readout error: <±15%
  • Repeatability: <12%
  • Stylus tip radius: 10.0±2.5 μm
  • Stylus cone angle: 90°
  • Stylus Static force: ≤0.016N
  • Force range: ≤800N/m
  • Probe force: ≤0.5N
  • Battery: 3.7V built-in lithium-polymer battery
  • Charger: DC 5V, 500mA, charging time about 3 hours
  • Dimension: 105 mm×70 mm×24 mm
  • Weight: 180g
  • Integrated Surface Roughness Tester Sr110
    Integrated Surface Roughness Tester Sr110
    Integrated Surface Roughness Tester Sr110
    Integrated Surface Roughness Tester Sr110
    Integrated Surface Roughness Tester Sr110
    Integrated Surface Roughness Tester Sr110

     
  •