The Latest Stone Pattern Series Mspc / Spc5mm Floor Recommended, High Gloss / Matt Finish

China The Latest Stone Pattern Series Mspc / Spc5mm Floor Recommended, High Gloss / Matt Finish, Find details about China PVC Floor, Vinyl Floor from The Latest Stone Pattern Series Mspc / Spc5mm Floor Recommended, High Gloss / Matt Finish

Model NO.
ZT6810
Pattern
Wood Grain
Color
Brown
State
Block
Usage
Household, Commercial, Office
Certificate
Ce / SGS / ISO9001/ISO14001
Transport Package
Carton and Pallet
Origin
Changzhou China
HS Code
3918109000
Model NO.
ZT6810
Pattern
Wood Grain
Color
Brown
State
Block
Usage
Household, Commercial, Office
Certificate
Ce / SGS / ISO9001/ISO14001
Transport Package
Carton and Pallet
Origin
Changzhou China
HS Code
3918109000
Product Description

The Latest Stone Pattern Series Mspc / Spc5mm Floor Recommended, High Gloss / Matt Finish

The Latest Stone Pattern Series Mspc / Spc5mm Floor Recommended, High Gloss / Matt Finish

All the floor surfaces can be produced into any sizes that listed above.

 Warranties: Lifetime Residential Wear

         Lifetime waterproof
         
Lifetime Structure
        
10 Years Commercial Wear

Installation Areas: Below,on,or Above Grade   Compliance: CARB Compliant

 Nominal sizes subject to normal manufacturing tolerances

The Latest Stone Pattern Series Mspc / Spc5mm Floor Recommended, High Gloss / Matt Finish
The Latest Stone Pattern Series Mspc / Spc5mm Floor Recommended, High Gloss / Matt Finish

Every step of process is under controlled seriously to make sure final products quality .
 

In-Floor Radiant Heat:

 

PVC flooring can be installed over radiant heat using the floating or glue down method.

When gluing floor,use only FNLS recommended multipurpose adhesive over manufactuer's

Recommended substrate.

 

Turn the heat off for 24 hours before, during and 24 hours after installation when installing over

Radiant heated subfloors.

 

Failure to turn the heat off may result in significantly shortened working time of the adhesive

Floor temperature must not exceed 30°C

Once the installation has been completed ,the heating system should be turned on

and increased gradually(5 degree increments) until returning to normal operating

conditions.

Failure to strictly follow adhesive manufacturer's guidelines may result in failure

And void the warranty.

Warning: Electric heating mats that are not embedded into the subfloor are not recommended for use underneath FNLS.Using electric heating mats that are not embedded and applied directly underneath FNLS could void the warranty for your floor

In case of failure. It is best to install FNLS over embedded radiant floor

Heating systems and adhere to the guidelines listed above.