Products

IP54 990r/Min High Quality Slip Ring Motor

China IP54 990r/Min High Quality Slip Ring Motor, Find details about China Yrkk Motor, High Voltage Motor from IP54 990r/Min High Quality Slip Ring Motor

Model NO.
YRKK500-6-560KW
Number of Poles
6
Starting Mode
Auto-induction Voltage-reduced Starting
Certification
ISO9001, CCC
Brand
China Motor
Voltage
10000V/11000V
Nsulation Class
F
Output Power
560kw
Cooling Method
IC411
Protection
IP44/IP54
Duty
S1
Frequency
50Hz.60Hz
Wire
Copper Wire
Driving
Compressor, Pump, Crushers, Stock-Removing Machine
Rated Speed
990r/Min
Trademark
ZCL
Transport Package
Plywood Case
Origin
Shijiazhuang, China
HS Code
8501530090
Model NO.
YRKK500-6-560KW
Number of Poles
6
Starting Mode
Auto-induction Voltage-reduced Starting
Certification
ISO9001, CCC
Brand
China Motor
Voltage
10000V/11000V
Nsulation Class
F
Output Power
560kw
Cooling Method
IC411
Protection
IP44/IP54
Duty
S1
Frequency
50Hz.60Hz
Wire
Copper Wire
Driving
Compressor, Pump, Crushers, Stock-Removing Machine
Rated Speed
990r/Min
Trademark
ZCL
Transport Package
Plywood Case
Origin
Shijiazhuang, China
HS Code
8501530090
IP54 990r/Min High Quality Slip Ring Motor
The high-quality slip ring motor is a wound-type three-phase asynchronous motor. The power class, installation size and electrical performance of this type of motor comply with the relevant IEC standards. The basic installation method of the motor is the horizontal bottom angle (IMB3), the working system is the continuous working system (S1), and the wound rotor is made of Class F insulation material.
The bearings of high voltage slip ring motors are available in both rolling and plain bearings, depending on the motor power and speed. The rated frequency of the motor's power supply is 50Hz, the rated voltage is 6000V/10000V, and the basic type of protection is IP54. The motor slip ring housing can be protected to IP22 or IP23. Other voltage, frequency and degree of protection motors are also available upon request.
High-quality slip ring motors can be used to drive a variety of different machinery, such as compressors, pumps, crushers, cutting machines, transportation machinery and other mechanical equipment, in mining, machinery industry, petrochemical industry, power plants and other industrial and mining Used as a prime mover in an enterprise. The motor used to drive the blower, coal mill, rolling mill and winch should indicate the purpose and technical requirements when ordering, and adopt special design to ensure reliable operation.
IP54 990r/Min High Quality Slip Ring Motor
Center height range: H355 ~ 1000mm
Power range: 185kW ~ 10000kW
Number of poles: 2/4/6/8/10/12
Rated voltage: 6000V/6600V
Rated frequency: 50HZ/60HZ
Protection level: IP54 or IP55
Insulation class: F
Work system: S1 (continuous)
Cooling method: IC611/IC616
Installation form: IMB3
Motor connection: Y (three outlet terminals in the junction box, the junction box from the extension of the spindle is located on the right side of the base)
Altitude: no more than 1000m
This type of motor is suitable for use in environments where the ambient air temperature does not exceed 40 ° C and there is no serious dust, the minimum ambient air temperature is -15 ° C, and there is no corrosive and explosive gas in the air (which can also be made into a damp heat or high-altitude motor).
IP54 990r/Min High Quality Slip Ring Motor
The high-quality slip ring motor is a sliding wrap-around three-phase asynchronous motor that can increase the starting torque at a small starting current. The motor is suitable for applications where the capacity of the feeder line is insufficient to start the squirrel-cage rotor, the starting time is long, the starting is frequent, and the small-range speed regulation is required. This series of motors has the advantages of high efficiency, energy saving, low noise, low vibration, light weight, reliable performance, convenient installation and maintenance.
IP54 990r/Min High Quality Slip Ring Motor
IP54 990r/Min High Quality Slip Ring Motor
The motor products manufactured by our company have obtained the ISO9001 quality management management system certification, passed the CCC/COC, China energy-saving product certification, and passed the certification certificates of CE/UL/IRIS/CAS and other European and American countries. The company strictly improves the quality and efficient motor products and services for users in strict accordance with the requirements of relevant product standards.
IP54 990r/Min High Quality Slip Ring Motor
IP54 990r/Min High Quality Slip Ring Motor
The company has large-scale laboratory, intelligent CNC winding machine, CNC rising machine, automatic wrapping machine, VPI high pressure vacuum immersion system, large-scale dipping paint drying furnace, 60 tons test platform, large vertical car, milling machine, grinding machine, Each type of dynamic balancing machine, double-feedback test and detection system with 6MW (12MW) motor and other motor production professional equipment more than 500 sets, sound mechanical equipment processing capacity, to lay a good foundation for customers to improve good quality motor products.
IP54 990r/Min High Quality Slip Ring Motor
IP54 990r/Min High Quality Slip Ring Motor
1. The outer packaging of the products are all standard export-oriented wooden plywood packaging.
2, the product packaging is protected by moisture, water plastic soft packaging
3. For products with special transportation requirements (such as temperature, fragile, variability, and easy to get wet), the packaging protection measures will be strengthened, and the target mark will be printed on the package.
4. There are obvious signs and symbols on the packing box that must be paid attention to during transportation and storage (such as position, moisture, rain, shockproof, lifting position, etc.).


 

You Might Also Like