7075 T6 T651 Stretched Aluminium Plate/Sheet Supplier
Alclad 7075 aluminum plate sheet
Two sides cladding, nominal cladding thickness is 4% on gauges under 1.57mm, 2.5% on gauges over 1.57mm. Property values for one side clad materials are similar.
Signi 7075 aluminum plate sheet offer moderately good strength toughness relationships and are the standard of comparision for more recent 7*** series alloy developments. Alloy 7075 aluminum plate sheet are not offered with guaranteed minimum fracture toughness values.
1. Alloy: 7075
2. Temper: O, T6, T651, T62, T652, T76, T7651, T73,T7351
3. Stretching capacity: 300000m2, supposed width is 2000mm, then the maximum thickness is 150mm.
4. Thickness: 1.0mm--300mm
5. Width: 500mm--3000mm
6. Length: 1000mm--12000mm
7. Surface: Mill finish, Bright finish, paper interleaved, one side film, both sides film.
Stretched plates |
Thickness limit | 6 - 70 mm |
Length limit | 2000 - 10000 |
Chemical Properties of 7075 aluminium sheet
Alloy | Si | Fe | Cu | Mn | Mg | Cr | Ni | Zn | Ti | Ga | V | Others | Aluminium min. |
Each | Total |
7075 | 0.4 | 0.5 | 1.2-2.0 | 0.3 | 2.1-2.9 | 0.18-0.28 | - | 5.1-6.1 | 0.2 | - | - | 0.05 | 0.15 | Remainder |
Contact information:
Web:henanxinyu.en.made-in-china.com
Phone:86-0371-55083768 FAX:86-0371-55685982
MOB:86-173-3717-6360