NTS709 High Pressure Common Rail Injector Test Machine

NTS709 HIGH PRESSURE COMMON RAIL INJECTOR TEST BENCH is used for testing common rail injectors from BOSCH, DENSO, DELPHI and SIEMENS. This test bench is our latested independent researched special device to test the performance of high-pressure common rail injector, controlled by industrial computer. The oil quantity is measured by sensor and displayed on computer screen (electronic fuel delivery system). All data can be searched and saved. It adopts BOSCH (DENSO) original common rail pump to provide 0-2000 bar rail pressure. The rail pressure can be adjusted automatically, and it also provide pressure overload protect. Advanced technology, steady performance, precise measurement and convenient operation.

Characteristic

1. Controlled by industrial computer in real time, touch screen operation

2. Oil quantity is measured by sensor and displayed on 19" LCD screen

3. More than 1700 kinds of injectors data can be searched, used and saved

4. It is installed original BOSCH (DENSO) high pressure common rail pump to provide 0-2000 bar rail pressure.

5. Rail pressure can be tested in real time and high pressure protection function.

6. Provide pressure overload protect

7. Injector drive signal pulse width and frequency can be adjusted

8. Injector inject times can be setted

9. Protection function of short-circuit

10. Precise measurement, easy operation, low noise.

11.Frequency converter inside to keep the RPM

12. Sensor: flow sensor

Function:

1. Test injector brands: BOSCH, DENSO, DELPHI, SIEMENS and piezo injectors

2. Test 1 , 2 or 4 pieces injectors at the same time

3. Test the pre-injection of common rail injector

4. Test the maximum oil quantity of common rail injector

5. Test the cranking oil quantity of common rail injector

6. Test the back flow oil quantity of common rail injector

7. Test the average oil quantity of common rail injector

8. Test the seal performance of common rail injector

9. Data can be searched and saved

Technical parameter

1. Pulse width: 0.1~20ms

2. Continuous injection times: 0~1000

3. Fuel temperature: 40+-2 degree centigrade

4. Rail high pressue: 0~2000 bar

5. Test oil filter fineness: 5 µ

6. Input power: 380V/50Hz/3Phase, 220V/ 60Hz/3Phase or 220V/60Hz/Single Phase

7. Rotation speed: 0~3000RPM

8. Oil tank capacity: 16L

9.Weight: 300KG