Horizontal Split Case Centrifugal Pumps

 Brief introduction
        This kind of pump is Horizontal Split Case Centrifugal Pumps that is specially designed and manufctured by our company which based on the market requirement and introduced from abroad.Pumps with both original impellers and modified impellers are available with enough stock. According to consumers' needs,our company could  provide pumps with complete range of  flow and head .
      This kind of pumps are uaually used to transfer clean water or similar liquids.They are suitable for water supply and discharge project for factories,mining,city and power station,meanwhile,farm irrigation and flood draining also use the pumps.
   
 Features

1,The structure of type Horizontal Split Case Centrifugal Pumps is horizontal.The inlet and outlet are below the axis,its centerline is horizontal and perpendicular to the axis,the casing is split casing.It is not necessary to disassemble the pipes and motor during repair;

2,The pump is made of casing parts,rotor parts,bearing parts,shaft sealing parts and coupling parts etc.;

3,There are two types of shaft sealings:packing seal and mechanical seal;

4,Pump is driven by motor(or other driver)through flexible coupling.The rotating direction is clockwise viewed from motor normally.
 

Pump picture
The picture is one Sf type water pump with motor and common base

Structure Diagram


Technical data(design point):
Flow Q: 160-18000m3/h
Head H: 12-125m
Max inlet pressure: 6 bar