1.Product size chart

RB type cross roller bearing (outer ring split type, inner ring rotation) This series is a basic type of cross cylindrical roller bearing. The inner and outer ring sizes are miniaturized to a minimum. The structure is that the outer ring is split type. The inner ring is an integral design and is suitable for parts requiring high rotation accuracy of the inner ring.

2.RB type cross roller bearing installation debugging editing

"When installing a crossed roller bearing, follow the following procedure: 1. Before installation, clean the bearing housing or other mounting parts, remove dirt, and confirm that the burrs of each component have been removed. When the seat or the shaft is inserted, it is a thin-walled bearing. When it is inserted, it is easy to be tilted. Please use a plastic hammer or the like to find the level, and evenly tap it in the circumferential direction and insert it bit by bit until it can be confirmed by sound. 3. When the contact surface is completely close. 3. Installation of the side compression flanges 3.1 After placing the side compression flanges in place, rock them back and forth several times in the circumferential direction to adjust the position of the mounting bolts. When tightening the bolts, when tightening the bolts by hand, make sure that the bolts are not screwed in due to the deviation of the bolt holes. 3.3 The tightening of the compression bolts can be divided into three to four stages, from the temporary to the final tightening. Tighten repeatedly. When tightening the two-part inner or outer ring compression bolts, the outer ring or inner ring is often rotated slightly during the tightening process. Two divided parts corrected. "

3.Application field





Industrial Robot Arm-Glass Grinding Equipment-CNC Turntable-CNC Rotary Table-Detection Instruments-Precision Medical Equipment-Aerospace Equipment-Military Radar.

4.The series models are all in production and need to be communicated in detail.