Product Description
Pet food is plant or animal material intended for consumption by dogs or other canines. The pet food is close

to the human beings food in the fine level, the health index and the nutritional ingredients, some of them request

more highly than human beings. In extruder, the ingredients are cooked under intense heat and pressure as it

moves toward the open end of the extruder where ingredients pass through a shaping die and knife. Dog food

is dried in a multi-pass dryer until its moisture content is low enough to make it shelf stable. Dog food may

pass through a coating drum where animal fat and vitamins are applied onto dog food.



Main Features
1. Raw materials: adopts wheat flour, corn flour as raw materials

2. Products:This line can be used to produce different shapes of doritos by adjusting the moulds from

extruder, Also, It can produce snack food .

3. Capacity: 100kg/h, 200kg/h

4. Flow chart:Mixing system---Extrusion system---Drying system--- Packing system

5. Voltage in China:Three phases: 380V/50Hz, Single phase: 220V/50Hz, we can make it according to customers' Local voltage according to different countries

6. Machines Materials:

7.Machine Material: Stainless Steel #304, thickness:1.2mm

8.Main Motor: Siemens China brand

9.Main Electric elements: Siemens or CHNT brand
 

10.Inverter: Delta brand 

Certifications


Detailed Images


70 Type Double Screw Extruder machine                                                                            Output:150-200kg/h/set

Main motor power: 30kw                                                                                                        Feeding motor:0.75kw

Cutting motor:1.1kw                                                                                                                   Water pump:0.37kw

Heating power:14kw                                                                                                               Screw length:1510mm

The feeding hopper touch product with SS201

Dimension: 3000 x 850 x 2200mm

Function: This machine can be used to extrude the raw material to different shape of food.The Single-screw

extruder is made of the feeding system, extruding system, cutting system, heating system, transmission system,

Vacuum Pump system, Cooling system and controlling system. We will feed the material from the feeding

machine and get the tissue state by high pressure extruding the material and the machine barrel must be with

water cooling system to control well the working temperature to make the products unpuffing.



Seven layers 8M gas/diesel dryer machine                                                             Drying temperature:60-70ºC

Drying time:2-3hours                                                                                                Humidity:80-85% keep inside 

Voltage : 380V, 50Hz                                                                                                   Belt power:2.2kwX2=4.4kw

Air Fan Power:1.1kwX6=6.6kw                                                                                 Hot air circulation power:3kw

power:0.37kwX3=1.11kw                                                                                                Burner:BTG-28Maximum

temperature:110degree                                                                                     Dimension :8000X3000X3100mm

Material :touch product with SS201

The oven is used to dry the products. The moister in the food which come out of the extruder is about 30-35%.

With the dry of the dryer, the moister can get down below 16% and this is easy to be storage for long time.

There are heating system and convey system. Sometimes there is also blower here in order to dry the food fast

according to the condition. The heating way is using burning gas. The hot air through the big air fan to go into the

downstairs pipes and distribute, the moister can be taken out of the food. There are seven layers belt in the

convey system and this can save space.   The belt is driven by the chain while the motor are driven by the

transducer, so this is working steady.   Heating: by Gas burning, consumption amount: 8-10m3/h

The burner is automatic working, once the temperature reaches the setting temperature, it will stop burning and

when the temperature not same as the setting one, it will open automatically, efficiency, safe and saving energy

Work shop of MT

Our partner


Packing and shipping

FAQ
1.What your machine warranty ?

One year , main parts warranty time will be 1 years .

2.Do you supply spare parts ?

Yes , we supply spare parts with resonable price .

3.What can you provide for after sale service ?

We can send engineers to your factory for installaion and training if customers' reuired .

4.If we show you our layout of factory , can you help to design the whole process line based on your real situation.

5.How can we contact you if we meet problems during production ?

6.If we have samples of new products , can you help to analysis and design the machine ?

Yes , our technical department can help analysis , design and test the new products you offered .