Products

Spray Insulation Blend Polyether Polyols

China Spray Insulation Blend Polyether Polyols, Find details about China Polyol, Blend Polyol from Spray Insulation Blend Polyether Polyols

Model NO.
SD1133
Core Density
40
Appearance
Liquid
Viscosity
300
Shelf Life
6 Months
Water Absorption
3
Trademark
Shunda
Transport Package
Drum
Specification
220kg/drum
Origin
China
HS Code
3907209000
Model NO.
SD1133
Core Density
40
Appearance
Liquid
Viscosity
300
Shelf Life
6 Months
Water Absorption
3
Trademark
Shunda
Transport Package
Drum
Specification
220kg/drum
Origin
China
HS Code
3907209000
Blend Polyol SD1133
Spray Rigid PU Foam For Cold storage
DESCRIPTION
SD1133 cold storage insulation system blend polyol is a kind of spray rigid PU foam blend polyol, specially used for the insulation of the wall of storage insulation. It used together with isocyanate(PM-200) to make rigid PU foam through PU spray machine. The foam produced has the characteristics as following:
  1. The strong adhesive force, convenient construction and no seams.
  2. The low thermal conductivity, low water absorption and good dimensional stability.
  3. The long service life.
TYPICAL PHYSICAL PROPERTIES
Physical ProperitiesTest MethodMetricValue
Core DensityGB/T 6343-2009kg/m338.3
Compressive StrengthGB/T 8813-2008kPa264
Tensile StrenghtGB/T 9641-88kPa136
Oxygen indexGB/T 2406.2-2009 %23.4
Initial Thermal ConductivityGB/T 10294-2008W/(m·K)0.022
Close Cell ContentGB/T 10799-2008%≥88
Water AbsorptionGB/T 8810-2005%≤3
Dimensional Stability
(Foam made After 6 days)		-25ºCGB/T 8811-2008%≤±1
≤±1
70ºC
Importance: The above mentioned are typical test values, and the specific data may vary slightly due to environmental conditions.For our products, the data are not legally binding.
PACKING SPECIFICATION
220KGS/Drum, Blue paint or Zinc coating drums (Drum Weight: 18-23kg)
STORAGE RECOMMENDATIONS  
The blend polyol should be stored in the sealed container to avoid the absorption of water vapor.  During the transportation, it should avoid serious shake and strong sunlight. It should be stored in ventilated place, avoiding light, water and fire. Recommended storage temperature is 15~25ºC.
Shelf life: 6 months, please test before using after 6 months storage.
SAFTY PRECAUTIONS
Direct contact with SD1133 type blend polyol can lead to moderate eye irritation and mild skin irritation, which can cause skin allergies. Repeated inhalation of high concentration of volatile gas will cause respiratory allergy, and should be treated immediately. Anti- inflammatory and anti-allergic treatment measures should be taken.
Please be careful in the operation to prevent contact with the skin and splash into the eye, please wear the necessary protective equipment (gloves, protective goggles, working clothes, etc.).
Once splashed on the skin or the eye, rinse with water immediately for at least 15 minutes, and the skin is washed with soapy water. Please seek medical treatment immediately after swallowed.
                                                                                       
Notice: This product specification is intended to be used by Shunda Polyurethane Company in order to show sincerity to our customers, while it is not covered by law as a guarantee. Customers can adjust according to the actual operating conditions. If you have any questions, please call our company and we will serve you wholeheartedly.
 

You Might Also Like