China Coal Mining Circle Vibrating Screen, Find details about China Vibrating Screen, Mining Vibrating Screen from Coal Mining Circle Vibrating Screen
Between the connection of circular vibrating screen's beam and screen box, it adopts high strength bolts; |
It has simple structure so that can maintain it easily; |
The mineral separator equipment adopts tyre coupling and flexible connection, running steady; |
The circular vibrating sieve adopts eccentric shaft and block as the vibration source; |
With strong vibrating exciting force, high frequency, large capacity, little amplitude and large angle, it can guarantee the high screening efficiency; |
Low noise, energy conservation; |
Eccentric shaft can be drived by motor through belt or motor through coupling. |
Model | Area | Angle | Material | Capacity | Frequency | Double Amplitude | Motor | |
(m2) | (°) | Size (mm) | (t/h) | (r.p.m) | (mm) | Model | Power (kW) | |
YA1236 | 4.3 | 20 | ≤200 | 40-250 | 730 | 8-11 | Y160L-8 | 7.5 |
2YA1236 | 2*4.3 | 20 | ≤200 | 40-250 | 730 | 8-11 | Y180L-8 | 11 |
YA1530 | 4.5 | 20 | ≤200 | 42-260 | 730 | 8-11 | Y180L-8 | 11 |
2YA1530 | 2*4.5 | 20 | ≤200 | 42-260 | 730 | 8-11 | Y180L-8 | 11 |
YA1536 | 5.4 | 20 | ≤200 | 51-300 | 730 | 8-11 | Y180L-8 | 11 |
2YA1536 | 2*5.4 | 20 | ≤200 | 51-300 | 730 | 8-11 | Y200L-8 | 15 |
YA1542 | 6.3 | 20 | ≤200 | 60-350 | 730 | 8-11 | Y180L-8 | 11 |
2YA1542 | 2*6.3 | 20 | ≤200 | 60-350 | 730 | 8-11 | Y200L-8 | 15 |
YA1836 | 6.5 | 20 | ≤400 | 61-400 | 730 | 8-11 | Y200L-8 | 15 |
2YA1836 | 2*6.5 | 20 | ≤400 | 61-400 | 730 | 8-11 | Y225S-8 | 18.5 |
YA1842 | 7.6 | 20 | ≤400 | 80-800 | 730 | 8-11 | Y200L-8 | 15 |
2YA1842 | 2*7.6 | 20 | ≤400 | 80-800 | 730 | 8-11 | Y225M-8 | 22 |
YA1848 | 8.6 | 20 | ≤400 | 80-680 | 730 | 8-11 | Y225S-8 | 18.5 |
2YA1848 | 2*8.6 | 20 | ≤400 | 80-680 | 730 | 8-11 | Y225M-8 | 22 |
Vibrating screen is essential in manufacturing processes for many factories. In general, when circular vibrating screen goes wrong, the whole production line will stop. In addition, the maintenance may delay the production. The following is the common troubles and maintenance of circular vibrating screen. |
When circular vibrating screen cannot be started or in a low amplitude, reasons are the following: 1, Motor is damaged. 2, Electric components controlling the circuit are damaged. 3, Low voltage. 4, Too many waste sundries on screen cloth. 5, Vibration exciting goes wrong. 6, lubricating grease is agglomeration. |
The concerning troubles are caused by mismanaging the clean-up and check the machine irregular. Therefore, replace the damaged components in time and check the machine regular, clean up the sundries produced by vibrating screen in time when machine finishes working. |
Reasons of abnormal flow of materials are the following: 1, Machine body is instability as the stiffness of screen box is not enough. 2, Screen box is horizontal deflection. 3, Support springs are deformation or damaged. 4, Screen cloth is damaged. 5, Unbalanced feeding. 6, Beam is fracture. |
When rotating speed of screen slows down and bearings are heating, follow the below methods. 1, Check the volume of lubricating grease in main bearing hole. 2, Inspect whether there is blocking of bearings. Clean up in time and replace the sealing components. 3, Check the oil in bearings. 4, Check whether bearings are damaged or poor installation. 5, Eccentric block on the wheel falls off, or sizes of eccentric blocks are different. |
If the machine noise at work, check the following components. 1, bearing of vibration exciting. 2, fastening bolts. 3, the beam. 4, Support springs. |