CE quality water/ air cooled chiller industrial chiller for sale
We are a professional chiller,heat exchanger,cold room,heat pump dry cooler and air conditioner manufacturer in China,which has more than 15 years experience in HVAC area. Our products have been exported to Europe,USA, Japan and Middle east etc.
Feature:1. 8 sizes available ranging from 380 kW to 1419 kW cooling capacity.
2.Semi-hermetic screw compressor for all models. Each compressor is equipped with a crankcase heater and a thermal overload cut-out; the screw compressor is also complete with a built-in electronic protection with temperature sensor located directly in the motor winding and on the discharge line.
3.External rotor type axial fans, equipped with three phase direct drive motors, low noise 8 poles, protection level IP54, provided with a protective outlet grille.
4.Evaporator built with high efficiency shell and tube type heat exchanger, factory insulated with flexible close cell material.
5.Condenser built with seamless copper tubes mechanically expanded into blue hydrophilic aluminum fins.
6.Refrigerant circuit complete with charge valves, filter drier, sight glass, gas-liquid separator, thermostatic expansion valve, high & low pressure switch. The heat pump unit is completed also with 4-way valve, liquid receiver and one way valve.
7.Hydraulic circuit built with galvanized pipe, complete with water discharge connection for shell and tube heat exchanger and flange type hydraulic connectors.
8.Electric panel consist of: compressor contactor, fan motor contactor, compressor isolating switch, fan protection breaker, phase sequence relay and microprocessor with function display.
9. Automatic operation dramatically reducing maintenance cost thanks to reliable microprocessor system.
Product description:Air-cooled chiller parameters(output temp 7ºC)
Model | UNIT | SLPA- |
20.2 | 25.2 | 30.2 | 40.2 |
Cooling capacity | Btu | 197896 | 223145 | 280466 | 377367 |
RT | 16.5 | 18.6 | 23.4 | 31.5 |
Kw | 58.0 | 65.4 | 82.2 | 110.6 |
×10³Kcal/h | 49.9 | 56.3 | 70.7 | 95.2 |
Total Power | KW | 18.4 | 20.5 | 28.6 | 38.0 |
Total Current | A | 33.6 | 37.6 | 52.3 | 69.5 |
Compressor | Qty | set | 2.00 | 2.00 | 2.00 | 2.00 |
Input power | KW | 15.7 | 17.9 | 24.9 | 33.3 |
Operation Current | A | 28.0 | 31.8 | 44.3 | 59.2 |
Condenser Fans | Type | Efficiency copper and Blue hydrophilic aluminum Finned heat exchanger |
Input power | kw | 1.14 | 1.14 | 1.50 | 2.52 |
Input Current | A | 3.00 | 3.00 | 3.84 | 5.10" |
Evaporator | Type | Horizontal shell-and-tube/Coil type high efficiency copper heat exchanger |
Chilled water Flow | L/min | 166 | 187 | 235 | 316 |
Water pipe connection | mm | 40 | 50 | 50 | 65" |
Chilled Water Pump | Type | High efficiency, low noise |
Input Power | Kw | 1.50 | 1.50 | 2.20 | 2.20 |
Head | m | 24 | 23 | 22 | 21 |
Refrigerant | Type | R22 |
Water tank Indicating Volume | Liter | 270 | 320 | 360 | 400 |
Safety protection | high and low pressure protection, overload protection, over temperature protection, phase sequence protection, etc. |
Dimensions (L*W*H) | Length | mm | 1950 | 2100 | 2200 | 2450 |
Width | mm | 1250 | 1250 | 1250 | 1350 |
High | mm | 1600 | 1600 | 1850 | 2050 |
Total Weight | KG | 830 | 1050 | 1250 | 1350 |
Note:
1, the table refrigeration conditions: cold water inlet temperature 12 ºC, cold water outlet temperature 7 ºC, ambient temperature 35 ºC, the use of ambient temperature range -7 ºC ~ 43 ºC;
2, crew safe operating range: Chilled water inlet temperature 9 ~ 20 ºC;
3, the series unit uses imported from Europe hermetic compressors, superior performance, strong anti-strike capability liquid;
4, standard power supply: 380V / 3N-50HZ, voltage fluctuation allowed ± 10%, frequency fluctuation ± 2%;
5, host the actual head of the pump head minus head losses within the host. (1mH2O = 9.8KPa)
6, In addition to the specifications and requirements, we can provide non-standard products according to customer requirements.
Products picture reference:Factory &certification:After service:
Freely contact us if any questions!