Products

Aluminium Aluminium Radiator Flat Tubes Pipes China

Aluminium Aluminium Radiator Flat Tubes Pipes China, Find details about China Aluminium Radiator Tubes, Aluminium Radiator Pipes China from Aluminium Aluminium Radiator Flat Tubes Pipes China

Model NO.
4045/4343/4043/7072 /3003/3305/6063
Alloying Ingredient
3000/4000 Series
Certification
CE, ISO, ISO9001:2008/SGS
Polished Aluminum Profile
Mechanical Polishing
Weld Width
Less Than or Equal To2mm
Weld Line Height
Less Than or Equal To0.08mm
Outer Diameter
9-61mm
Wall Thickness
1-3.0mm
Trademark
Chalco Aluminum
Transport Package
Ep Paper Inside, Craft Paper/Pallet Outside.
Specification
According to Customer Requirement
Origin
Henan China
HS Code
7604210000
Model NO.
4045/4343/4043/7072 /3003/3305/6063
Alloying Ingredient
3000/4000 Series
Certification
CE, ISO, ISO9001:2008/SGS
Polished Aluminum Profile
Mechanical Polishing
Weld Width
Less Than or Equal To2mm
Weld Line Height
Less Than or Equal To0.08mm
Outer Diameter
9-61mm
Wall Thickness
1-3.0mm
Trademark
Chalco Aluminum
Transport Package
Ep Paper Inside, Craft Paper/Pallet Outside.
Specification
According to Customer Requirement
Origin
Henan China
HS Code
7604210000

The Radiator aluminium flat tube refers to a flat aluminium tube applied to the radiator. The radiator made of the aluminum flat tube takes up small space, is light in weight, is convenient to install and maintain, has good pressure bearing performance, and can be used for various heat mediums.

1, The type of Radiator material:
1), Radiator motherboard
2), Radiator aluminium flat tube
Cladding layer: 4343, 4045
Core layer: 7072 anti-corrosion
Forming: high frequency welding
3), Water tank aluminium flat tube
Cladding type: single Cladding material, double Cladding material
Cladding layer: 4045, 4343, 7072 anti-corrosion layer, zinc can be added
Material Temper: H14;
Cladding rate: 10±2 or according to customer requirements

2, The introduction of Radiator materials(Radiator aluminium flat tube)
Cladding type: single Cladding material, double Cladding material
Cladding layer: 4045, 4343, 7072 anti-corrosion layer, zinc can be added
Material Temper: H14;
Cladding rate: 10±2 or according to customer requirements
Core layer: 3003, 3305
Production Process: high frequency welding, cold drawing
Wall thickness: 0.08-1.2mm
Appearance: can be customized according to customer requirements.

3.The Product Characteristics of Radiator aluminium flat tube:
1). light weight
2). easy welding
3). Good corrosion resistance
4). Good Voltage Resistance
5). Compliance with standard ROHS
6). High recycling value
7). Small deviation range
8). High surface quality


4, The usage of Radiator aluminium flat tube:
Radiator aluminium flat tube is mainly use for parallel flow condensers, car water tanks, new energy vehicles

5,The tech requirements and common dimensions of the Radiator aluminium flat tube are shown as below:
1).The cutting end face burr does not exceed 0.1mm,and the inner wall weld line height does not exceed 0.2mm
2).Cutting end face angle 90°+/-2
3).The inner and outer surface of the pipe should be clean and free of foreign matter such as oil,dust and aluminum chips;no defects such as pressure pits,bumps,and scratches are allowed.
4).The length and material of the pipe are customized according to customer's requirements
5).The existing specifications of our company are shown as below table


Aluminium Aluminium Radiator Flat Tubes Pipes China



Aluminium Aluminium Radiator Flat Tubes Pipes China
Aluminium Aluminium Radiator Flat Tubes Pipes China
 

You Might Also Like