Fuse Switch Disconnector 40A, 63A, 100A, 200A, 400A, 630A, 800A.
ApplicationHR17 series fuse disconnector switch can be operated with load, rated current 6A~630A, it has input and output top and bottom, with blade inlet and arc extinguishing device; on the switch cover has closed detection holes from time to time, with built-in signal switch, detection switch. Optional fuse monitor, can also be used as a knife switch. The switch is decent in outlook, it conforms to IEC60947-3 standard.
Main Technical DataRDHR17 Series Fuse Disconnector Switch
Outline and mounting sizeAcc. connectorsOperation and MaintainanceWhen the fuse is blown, when replacing new fuse, the load power should be disconnected, pull apart the operating handle to replace the fuse. The new fuse link can be pushed directly along the card slot, and apply an appropriate amount of conductive paste to the surface of the blade. Replacement must be a new fuse with same model, same size, and the same rated current as the fuse used. Do not replace it with copper wire. When replacing the fuse, please pay attention to remove dirt such as dust on the contacts.
About the Company(Our Test Lab)
RADIN parts are TUV, CB, CE, CCC certified, and the factory is ISO9001:2015 qualified.
FAQ:1. What's the warranty term?24 Monthes.
2.How long does it take to deliver my goods?Normally, samples can be delivered in 2 days. Customer designed sampleswill be delivered in 3-7 days.
3. Do you offer sample?Yes, we offer sample order for customer to test the goods.
4. What kinds of payment terms do you accept?We offer kinds of payment ways foe customer to chose from. T/T,L/C,Aliexpress,Western union etc.
5. What if there's quality peoblem?We offer replacement for the goods as soon as there is a quality problem with the goods, and the fright is on our account to cut down the customer's loss to the lowest.
We are sure any of your questions will get our prompt reply, just leave the message!