Portable Transformer Ratio Tester TTR Tester

China Portable Transformer Ratio Tester TTR Tester, Find details about China Transformer Turns Ratio Tester, TTR Meter from Portable Transformer Ratio Tester TTR Tester

Basic Info.

Standard

IEC

Trademark

GDHM

Transport Package

Wooden Box with Foam Inside

Specification

430*320*215mm

Origin

Hubei, China(Mainland)

HS Code

9030849000

Standard

IEC

Trademark

GDHM

Transport Package

Wooden Box with Foam Inside

Specification

430*320*215mm

Origin

Hubei, China(Mainland)

HS Code

9030849000

Product Desciption

Fully Automatic Portable Single Phase & 3 Phase Transformer Turns Ratiometer Multifuctionl Transformer Ratio Tester TTR Meter

I. Product overview

HM5001Z Transformer Turns Ratio Meter is specially designed for three-phase transformer in power system, it can perform full blind testing,and it can adapt to the needs of various large, medium and small transformers transformation ratio testing (including Z-type transformers, rectifier transformers, electric furnace transformers, non-integral point-shifted phase changes, balanced changes, Scott and Inverse Scott Transformer)

The HM5001Z Transformer Turns Ratio Meter has wide testing range, fast testing speed, favorable repeatability, flexible data processing, convenient connection, complete protection, easy learning and convenient operation.

II. Technical index
1. TTR measurement range: 0.8~10000.
2. High measurement speed: three-phase test can be completed within 40 seconds.
3. Measurement accuracy:
Voltage measurement accuracy on HV side: 0.05%
Voltage measurement accuracy on LV side: 0.1%
Phase angle measurement accuracy: 0.1°
TTR measurement accuracy: 0.1%(0.8-3000)
0.2%(3000-10000)
4. Volume: 320mm*240mm*130mm.
5. Weight: 8Kg.

Portable Transformer Ratio Tester TTR Tester

III. Function features
1. Input single power, internal digital combination standard sine wave test source output
2. Phase angle measurement function: measure the phase angle between high voltage side and low voltage side. Measure the turn ratio and angle of "Non integral point" transformer.
3. It can conduct single-phase measurement and three-phase winding automatic test. Three phase turn ratio value, phase angle value, error, tapping position, tapping value can be measured for once.It also can identify connecting group number automatically.
4.Testing results can be displayed in the form of digit and hexagon vector diagram, which makes transformer connecting group can be made out obviously.
5. With blind test function: There is no need to choose connecting method and group. When measuring Y/△,△/Y transformer, no external short-circuit is needed, connecting method can be shifted automatically according to the chosen testing contents.
6. With tapping test function: TTR and TTR error in the position of each tapping switch can be gauged quickly. Just input rated TTR once, instead of inputing over and over again, TTR error in tapping position can be calculated.
7. With functions of turns ratio measurement and voltage TTR measurement.
8. With 5.6 inch LCD, the effect of data & figure display is visualized and fine.
9. With small size and light weight, it is easy to carry.
10. With built-in high capacity chargeable lithium battery. Test can be conducted without any power supply on site, and once the battery is charged fully, it can make measurement for more than 500 times continuously.

IV. Related Products