D301 EM-ID or MF Rfid Reader

Specification

*Wiegand 26bits/ Wiegand34bits, RS485 Standard Format Data Output

*Support ID (125 KHz),MF(13.56Mhz) Card

*Less than 0.2 second Response Speed

*Less than 0.5 seconds Proximity Time Distance:

*10cm Proximity Range

*-25ºC to 75ºC Ambient Temperature

*10%-90% Ambient Humidity

*Built-in Antenna

*Built-in LED (Double Color LED)

*Built-in Loud Speaker (Buzzer)

*DC 5V-16V Working Voltage. Standard Direct Current 12V

*70mA Working Current

*100 Meters Communication Distance

*Real Time Data Transfer

*Light Yellow

*PVC Case Material (Black Resin for Water-Proof Function)

*Size: 88*88*21(mm)

Package:

100pcs per carton. Carton Size: 43.5*56*23(cm)

Packing List:

1*RFID Reader

Installation Description

Using + type screw driver to loosen the screw between the panel and motherboard. And then embed the motherboard to the side wall with the plastic plug and screws.

Wire Connection

Red DC 9V to 16V

Black GND

Green D0

White D1

Yellow BEEP

Blue   LED

Grey  Wiegand 26/Wiegand 34( defualt is Wiegand 26 bits, if you need weigand 34 function , connect Grey wire to GND)

Orange  Door Bell

Grown   Door Bell

Notice

1. Confirm the electric voltage (DC12V) and differentiate positive anode and cathode of power supply

2. When external Power is used, make sure sharing the power with Controller Box or using the same GND

Application 



Certification 


Access control card reader photo 




Wire diagram