China Professional Factory Bottle Cap Aluminum Sheet 8011 O H12 H14 H18 Aluminum coil for Bottle Caps, Find details about China Bottle Cap Aluminum Sheet, Aluminum Sheet from China Professional Factory Bottle Cap Aluminum Sheet 8011 O H12 H14 H18 Aluminum coil for Bottle Caps
Alloy | Temper | Thickness | Width | Length | Coil | Strip | Earing | Diagonal |
8011, 3105 | H14, H16, H24, H26 | 0.15~0.25 mm (+/-0.005mm) | 500~1000 mm (+0.5mm, -0mm) | 500~1000 mm (+0.5mm, -0mm) | 500~1000 mm | 20~500 mm | 1 | ≤ 1mm |
Alloy | Fe | Si | Cu | Mn | Mg | Cr | Zn | Ni | Ti | Other | Al | |
Each | Total | |||||||||||
8011 | 0.60~1.0 | 0.50~0.9 | 0.1 | 0.2 | 0.05 | 0.05 | 0.1 | - | 0.08 | 0.05 | 0.15 | Remain |
3105 | 0.7 | 0.6 | 0.3 | 0.3~0.8 | 0.2~0.8 | 0.2 | 0.4 | - | 0.1 | 0.05 | 0.15 | Remains |
Alloy | Temper | Thickness (mm) | U.T.S (Mpa) | Elongation (%) |
8011 | H14 | 0.15~0.25 | 185~205 | >=2 |
Alloy | Temper | Thickness (mm) | U.T.S (Mpa) | Elongation (%) |
8011 | H14 | 0.15~0.25 | 125~155 | >=2 |
3105 | H14 | 0.15~0.25 | 150~200 | >=1 |
Haomei 8011 3105 aluminum sheet aluminium PP Caps Sheet are suitable for both transparent and non-transparent lacquering, and will not bend during curing process. For applications requiring deep drawing, such as long caps, Haomei aluminium closure sheets show very low earing, greatly reducing scrap rate for our clients.
Haomei Aluminum closure sheet is rolled to very fine tolerances to yield more closure per tonne of stock and to allow uninterrupted operation of high-speed, multiple-cavity presses. Its strength, high formability, low earring and printable surfaces make it ideal for pilfer-proof caps and vial seals.