Anti-Static Polyester Wipers ESD Clean-Room Lint -Free Wipes
China Anti-Static Polyester Wipers ESD Clean-Room Lint-Free Wipes, Find details about China Lint-Free Wipes, Lint-Free Wipers from Anti-Static Polyester Wipers ESD Clean-Room Lint-Free Wipes
Basic Info.
Model NO.
E-6300ESD
Trademark
ECW
Specification
9*9 inches, 140g Antistatic
Origin
China
Model NO.
E-6300ESD
Trademark
ECW
Specification
9*9 inches, 140g Antistatic
Origin
China
Product Desciption
Cleanroom wipe is widely used in the fields of optoelectronics, electronics, precision instrument manufacturing, semiconductor production lines, etc.
Generally, there are three commonly used cutting methods for cleanroom wipe cutting technology,namely mechanical cutting, laser cutting and ultrasonic cutting.
Cutting Methods
Cold cutting( Mechanical cutting): It is mainly cut directly by electric scissors. This cutting method is easy to produce dander, and it can't be cleaned. It will produce dander on the edge during wiping. It has low cleanliness. It is generally not recommended for high requirements.
Laser cutting: through the laser high-temperature melting, the edge sealing is better, no chipping phenomenon, and can be cleaned after the cutting, so that this method can meet the high cleanroom standard. The disadvantage is that because the edge is blown, it will be a bit harder, so if be careful in the process of wiping, there is usually no problem .
Ultrasonic cutting: The vibration generated by the ultrasonic vibration group (vibrator) (converts electrical energy into mechanical energy), passes the heat through the HORN (welding head), and then breaks the fabric through the cutter. It is the most perfect cutting methods, and the edge sealing effect is good and the edges are not hard, but this method is relatively costly.
Classification
By the differences of the texture,cleanroom wipes could be classified as Straight,plain/girds, random wipes.
By the fineness, it could be classified as common/ordinary,microfiber,super-microfiber wipes
Generally, there are three commonly used cutting methods for cleanroom wipe cutting technology,namely mechanical cutting, laser cutting and ultrasonic cutting.
Cutting Methods
Cold cutting( Mechanical cutting): It is mainly cut directly by electric scissors. This cutting method is easy to produce dander, and it can't be cleaned. It will produce dander on the edge during wiping. It has low cleanliness. It is generally not recommended for high requirements.
Laser cutting: through the laser high-temperature melting, the edge sealing is better, no chipping phenomenon, and can be cleaned after the cutting, so that this method can meet the high cleanroom standard. The disadvantage is that because the edge is blown, it will be a bit harder, so if be careful in the process of wiping, there is usually no problem .
Ultrasonic cutting: The vibration generated by the ultrasonic vibration group (vibrator) (converts electrical energy into mechanical energy), passes the heat through the HORN (welding head), and then breaks the fabric through the cutter. It is the most perfect cutting methods, and the edge sealing effect is good and the edges are not hard, but this method is relatively costly.
Classification
By the differences of the texture,cleanroom wipes could be classified as Straight,plain/girds, random wipes.
By the fineness, it could be classified as common/ordinary,microfiber,super-microfiber wipes
You Might Also Like
30-50cbm Movable Hopper for Discharging Bulk Cargo
4b-Wd Bsp Male ED Sealing Plug
Standard Specimen Clamp for Microtome
Luxury Crystal Glass Scent 30ml 1 Oz Perfume Bottle
Tetra Pak Sugar Dissolving System
High Quality Factory Supply Zinc Plated Pozi Countersunk Chi......
Improve Root System Root Promoter Seaweed Functional Organic......
Creative Handmade Three-Dimensional Photo Frame Outside Thic......
Jinko Panel High Quality Pmw Dimming Controller Ni-MH Batter......
80/20 Copper Nickel ( CuNi20 )
Natural Blue Gemstone Stone Oval Vanity Hotel Wash Basin Sin......