Products

Transformer CT PT Calibration Testing Equipment Current Transformer Test
Transformer CT PT Calibration Testing Equipment Current Transformer Test

Transformer CT PT Calibration Testing Equipment Current Transformer Test

China Transformer CT PT Calibration Testing Equipment Current Transformer Test, Find details about China CT PT Analyzer, Transformer Calibration Tester from Transformer CT PT Calibration Testing Equipment Current Transformer Test

Model NO.
WXPT-H
Insulating Medium
Common Insulating Materials
Installation
Extension Type
Magnetic Circuit Structure
Single Stage Type
Voltage Transformation Principle
Capacitive Type
Warrenty
1 Year
Admittance(Ms)
0.0001~20.0
Quadrature Component(Cent)
0.001~700.0
Percentage Table
2 Level(1 Level Optional)
Secondary Winding Resistance
0.1~300ohm
CT Turns Ratio
Less Than 25000A/5A(5000A/1A)
Working on-Load Voltage
a, X<0.25va(100V)
Product Name
Wxpt-H CT/PT Calibrator
Report
Yes
Trademark
WG Hipot
Transport Package
Wooden Carton
Specification
560*480*680mm
Origin
Wuhan, China
HS Code
9030390000
Model NO.
WXPT-H
Insulating Medium
Common Insulating Materials
Installation
Extension Type
Magnetic Circuit Structure
Single Stage Type
Voltage Transformation Principle
Capacitive Type
Warrenty
1 Year
Admittance(Ms)
0.0001~20.0
Quadrature Component(Cent)
0.001~700.0
Percentage Table
2 Level(1 Level Optional)
Secondary Winding Resistance
0.1~300ohm
CT Turns Ratio
Less Than 25000A/5A(5000A/1A)
Working on-Load Voltage
a, X<0.25va(100V)
Product Name
Wxpt-H CT/PT Calibrator
Report
Yes
Trademark
WG Hipot
Transport Package
Wooden Carton
Specification
560*480*680mm
Origin
Wuhan, China
HS Code
9030390000
I.Equipment Description:
Transformer CT PT Calibration Testing Equipment Current Transformer Test 
Transformer CT PT Calibration Testing Equipment Current Transformer Test1.Product Description
WXPT-H CT/PT Calibrator is our new generation of CT/PT on-site calibration device in order to better adapt to the environmental characteristics of transformer on-site verification. It has been further improved in accuracy and intelligence.

2.  Features
1).Application of 320×240 LCD, broad vision, long life backlight, make it convenient to operate.
2). All English interfaces, simple and nice.
3). Extra-large display of percentage, ratio error and phase error, easy to observe.
4). Automatic sampling, fully meet the requirements of JJG314-1993 and JJG314-1994.
5).Automatic identification of polarity fault and ratio error mistake.
6).Software can be upgraded with time.
7). Completely solve the testing problems that Class S encounters.
8). Automatic switch of measuring range.
9).Perfect combination of advanced circuit technique and DSP; ultimately avoid the instability of the RC phase -shift circuit.
10). Power consumption:  <15VA (without micro-printer)
<25VA (with micro-printer)
11). Harmonic suppression ratio: >40db
12). Dimensions: 260mm (L) ×350mm (W) ×150(H) mm
13). Weight: 6kg

3 Parameters

Working ConditionTemperature:5ºC~40ºCRelative humidity:<80%(25ºC)
Altitude:<2500m
Power Frequency:50Hz±0.5HzPower Voltage:220V±5V
Measuring rangeIn-phase component (%):0.0001~200.0Resolution:0.0001
Orthogonal Component (min): 0.001~700.0Resolution:0.001
Impedance (Ω):0.0001~20.0Resolution:0.0001
Admittance (ms):0.0001~20.0Resolution:0.0001
Basic ErrorIn-phase ComponentΔX=±(X×2%+Y×2%)±Dx (with Class 1 to spare)
Orthogonal ComponentΔY=±(X×2%+Y×2%×34.48)±Dy (with Class 1 to spare)
"X", "Y"--Values displayed
"Dx, Dy"--Quantization error
Dx=2,Dy=5
PercentageClass 2 (with Class 1 to spare)
Working RangeCurrent(1%~149%)In (In =5A)
(5%~149%)In (In =1A)
Voltage(5%~149%)Un (Un =100V,150V,100V/)
(5%~149%)Un (Un =100V/3)
Working LoadCurrentTOTX<0.12Ω cosΦ=1
Voltageax<0.25VA (100V)
Reversed Polarity IndicationTake action according to the polar instructions when the current is larger than 5% of the rated value and the error is larger than 180%.
Note: If no indication comes up when the current is larger than 10% of the rated value, malfunction exists. In that case please be sure not to increase the current so as not to burn the machine.
Indication of False Transformation RatioThere should be an indication of false transformation ratio when the current is larger than 5% of the rated value and the error is between 30% and 180%.
Insulation and High Voltage TestTerminal TX is connected with terminal ().
The power socket can bear a voltage of 1.5kV with respect to the outer shell for 1 min.
II.Company Profile: 

Wuhan WG Hipot Electric Tester Co.,Ltd. (hereafter referred to as WG Hipot) is the professional factory of high voltage testing equipment with over 15 years industry experience. 

ISO Certified factory, qualified R&D and after-sales Engineer team, 3000 square meters workshop, our high voltage testers cover full range: High voltage hipot tester, Circuit breaker Switchgear Tester, Transformer tester, Relay Protection Tester, CT/PT Tester, MOA/Insulator Tester, SF6/Insulation Oil Test Equipment, Resistance Tester, etc.

Since 2003, with the support from our investors Wuhan High Voltage Institution and Xi'an High Voltage Institution, WG Hipot established and pioneered in high voltage testing field in domestic market as the designated supplier for State Grid and mainstream power companies. 

Meantime, WG Hipot has developed overseas markets across 5 continents worldwide. We gained good feedback from our customers with our high performance, good quality, customized specification and easy-to-operate high voltage testers, which can be widely used in railway, oil and chemical industry, electricity grid, university, big factory etc.

Transformer CT PT Calibration Testing Equipment Current Transformer TestIII.Customer Visit: 
Transformer CT PT Calibration Testing Equipment Current Transformer TestIV.Filed Test&Service:
Transformer CT PT Calibration Testing Equipment Current Transformer TestV.Certification:
Transformer CT PT Calibration Testing Equipment Current Transformer TestVI.Package & Shipment:
Transformer CT PT Calibration Testing Equipment Current Transformer TestTransformer CT PT Calibration Testing Equipment Current Transformer Test
VII. FAQ
1.When can I get the price?
We usually quote within 6hours after we get your inquiry. If you are vey urgent to get price, please call us or tell us in your email so that we will regard your inquiry priority.
2. What about the leading time for production?
Honestly, it depends on the order quantity and the product. Usually our leading time is within 7 working days after order confirmed.
3. What is your payment terms?
We accept EXW,FOB, CFR, CIF, ect. You can choose the one which is the most convenient and cost effective for you.
4. How much will be the Shipping cost and time?
This will depend on the size of your goods and the method of shipping (by sea/ by air/by Express) and your designated port or airport. We will be grateful if you can spare us some minutes to evaluate the cost based on the information provided.
5. Could you please tell me the Warranty Period of your product?
Our warranty period is one year free and lifelong maintenance. If the product is damaged (if not man-made damage), in the first year,we will send free parts for replacement. Over warranty, maintenance is paid service.
6. What kind of Certificate can you provide?
We can provide the CE mark, ISO 9001 quality certificate, third party calibration certificate(CNAS) and factory test report.
7. Do you have Technical Backup to all customers from different countries?
To be sure,our technical support is always available and quick response.
We are manufacturer with much on-site testing experience, thus we know how to deal with your problems. Moreover, our engineers can go to your country to support if need.

 

You Might Also Like