N08031 BW Welded 90Deg LR Elbow
Key Specifications/Special Features:
Introduction:
Alloy 31 is an iron-nickel-chromium-molybdenum alloy with nitrogen addition
It has a pitting resistance in high chloride environments between those of super-austenitic stainless steels and nickel alloys
Alloy has very good corrosion resistance in mixed acid and high chloride environments
Material is approved in ISO 15156/NACE MR0175 to test level VI for sour gas service
Typical applications:
Control lines
Control and instrumentation tubes
Heat exchangers
Chemical processing
Oil and gas
Typical wire chemistry:
C: 0.0015
Mo: 6-7
N: 0.2
Cr: 26-28
Ni: 30-32
Mn: 2
Si: 0.3
P: 0.02
Cu: 1.2
S: 0.01
Fe: Bal
| Introduction |
Inconel 625 is a Nickel-Chromium-Molybdenum alloy with excellent corrosion resistance in a wide range of corrosive media, being especially resistant to pitting and crevice corrosion. It is a favourable choice for sea water applications.
Chemical Composition of Inconel 625
The compositional range for Inconel 625 is provided in the table below.| Element | Content | | Ni | 58% min | | Cr | 20 - 23% | | Mo | 8 - 10% | | Nb+Ta | 3.15 - 4.15% | | Fe | 5% max |
Typical Properties of Inconel 625
Typical properties of Inconel 625 are covered in the following table.| Property | Metric | Imperial | | Density | 8.44 g/cm3 | 0.305 lb/in3 | | Melting point | 1350 °C | 2460 °F | | Co-Efficient of Expansion | 12.8 μm/m.°C
(20-100°C) | 7.1x10-6 in/in.°F
(70-212°F) | | Modulus of rigidity | 79 kN/mm2 | 11458 ksi | | Modulus of elasticity | 205.8 kN/mm2 | 29849 ksi |
Properties of Supplied Materials and Heat Treated Materials| Condition of Supply | Heat Treatment (After Forming) | | Annealed/Spring Temper | Stress relieve at 260 - 370°C (500 - 700°F) for 30 - 60 minutes and air cool. | | Condition | Approx Tensile Strength | Approx Service Temp. | | Annealed | 800 - 1000 N/mm2 | 116 - 145 ksi | -200 to +340°C | -330 to +645°F | | Spring Temper | 1300 - 1600 N/mm2 | 189 - 232 ksi | up to +200°C | up to +395°F |
Relevant Standards
Inconel 625 is covered by the following standards:
• BS 3076 NA 21
• ASTM B446
• AMS 5666
Equivalent Materials
Inconel 625 is the tradename of Special Metals Group of Companies and equivalent to:
• W.NR 2.4856
• UNS N06625
• AWS 012
Applications of Inconel 625
Inconel 625 typically finds application in:
• Marine
• Aerospace industries
• Chemical processing
• Pollution control equipment |
Company information:
Phone:+8613400008153
Tel: 0510-88222973
Fax: 0510-88222975
Web: taixie.en.made-in-china.com
Add:No.22, Xinfeng Road, Xinwu District, Wuxi, Jiangsu, China.
Over 16 years of specialist experience in Copper, Mould steel, steel alloy! Welcome to order and customized.