Water Cooling High Shear Homogenizer Emulsifier

China Water Cooling High Shear Homogenizer Emulsifier, Find details about China Blender, Emulsifier from Water Cooling High Shear Homogenizer Emulsifier

Basic Info.

Model NO.

VME-C

Customized

Condition

New

Warranty

1 Year

Material

Contacted Parts with SS316L, Other with SS304

Industry

Pharmaceutical, Food, Cosmetic, Chemical Field

Surface

Mirror Polished

Standard

GMP

Automatic Level

Complete PLC Automatic Control Operation

Cleaning

with CIP Cleaning System

Working Pressure

Vacuum Pressure

Efficiency

Ideal Homogenization

Structure

Complete Assembly Unit

Heating

Electric or Steam

Trademark

Zhejiang Sunny

Transport Package

Wooden Case

Specification

200-800L

Origin

Wenzhou China

HS Code

8479820090

Model NO.

VME-C

Customized

Condition

New

Warranty

1 Year

Material

Contacted Parts with SS316L, Other with SS304

Industry

Pharmaceutical, Food, Cosmetic, Chemical Field

Surface

Mirror Polished

Standard

GMP

Automatic Level

Complete PLC Automatic Control Operation

Cleaning

with CIP Cleaning System

Working Pressure

Vacuum Pressure

Efficiency

Ideal Homogenization

Structure

Complete Assembly Unit

Heating

Electric or Steam

Trademark

Zhejiang Sunny

Transport Package

Wooden Case

Specification

200-800L

Origin

Wenzhou China

HS Code

8479820090

Product Desciption

Water Cooling High Shear Homogenizer Emulsifier

Purpose: The equipment is suitable for emulsification of the pharmaceutical, Cosmetic, fine chemical products, especially the material having high matrix viscosity and solid content. Such as cosmetic, cream, ointment, detergent, salad, sauce,lotion, shampoo, toothpaste,mayonnaise and so on.

Structure: including main emulsifying pot, water pot ,oil pot and work frame.
1 Usually the oil pot is used for dissolving some solid that the product can just only be dissolved into oil, then the dissolved solvent will be sucked into the emulsify pot by soft pipes.
2 The function of water pot is the same as the oil pot.
3 emulsify pot is used for emulsifying the products that suck from the oil pot and water pot.

Main frame: including emulsify pot, lifting system, discharge system, vacuum system, electric control system, rotate system, mixing system.

Vacuum pump is connected by two soft pipes, one is connected the water tank by soft pipe which is used for sealing when the pump is operating; the other connected to main emulsifying pot through pipes and gas-liquid separator, so that the pump can make the main emulsify pot under vacuum condition. The gas-liquid separator is separating the gas and water, because the steam is sucked into vacuum pump when it is working, the steam through gas---water separator, some of steam become into water which flow out at the bottom of the separator.

Electric control system

The vertical motor is high speed motor which can rotate between 0-3500 rmp/min
You can demolition the motor by open the screws and one wire.
Mixer: it include low speed mixer and high speedy mixer (homogenizer)
Emulsifying pot:including cover, pot, bottom valve, temperature sensor, heating system.

This machine is heated by electricity, you just fill water into jacket, then turn on the heating system, the water is heated by electricity according to your requirement.
This machine also can be heated by steam, you just connect to steam producer when you heat the machine by steam.

Discharge hole: it is used for discharging the product just open the valve by pressed air.
Temperature sensor: it is used for checking the temperature of the product inside pot
Accessories on the cover: including vacuum protection system, pressed air inlet hole, vacuum and plus pressure meter, mirror, CIP system for washing, break vacuum hole, material inlet hole, prepare hole for inlet perfume, automatic control vacuum valve and so on.

Negative pressure meter is used for check the pressure inside pot.
Pressed air inlet hole: it is connected with Air Compressor by blue soft pipe. it can press the product by air when the product is finished so that the product will be discharged under the plus pressure.
Mirror: you can see inside pot by turning on the light

Break vacuum hole: it can break the vacuum inside pot by turning the valve, there is air filter inside valve. The product can not be discharged under vacuum condition, it just can be discharged without vacuum.
CIP: it is used for cleaning the inside pot by connecting tap water

Perfume inlet: it is prepare hole for put perfume into the pot.
Suck product inlet pipe: it is used for sucking product from the oil pot and water pot.
You also can suck the product from oil pot and water pot to emulsify pot by vacuum through the stainless steel pipe.

Technical Parameter

Model	Effective Capacity	Emulsify		Agitator		Vacuum Pump		Heating Power
Model	Effective Capacity	kw	r/min	kw	r/min	kw	Limit Vacuum	Electric Heating	Steam Heating
VME-C200	200	5.5	0-3300	1.5	0-65	2.2	-0.09	28	10
VME-C300	300	5.5	0-3300	2.2	0-65	2.2	-0.085	32	12
VME-C500	500	7.5	0-3300	4	0-60	4	-0.085	50	16
VME-C800	800	11	0-3300	5.5	0-60	4	-0.08	65	25