Products

4-6 T/H Palm Waste Biomass Pelleting Line

China 4-6 T/H Palm Waste Biomass Pelleting Line, Find details about China Palm Waste Biomass Pelleting Line, Biomass Pelleting Line from 4-6 T/H Palm Waste Biomass Pelleting Line

Customized
Customized
Condition
New
Color
Multi Color
After-sales Service
Provided
Trademark
FDSP
Transport Package
Iron Case
Origin
Jiangsu China
HS Code
8436100000
Customized
Customized
Condition
New
Color
Multi Color
After-sales Service
Provided
Trademark
FDSP
Transport Package
Iron Case
Origin
Jiangsu China
HS Code
8436100000
 
4-6 t/h Palm waste biomass pelleting line

Taking palm waste as raw material, it was solidified and extruded into high density pellet fuel through pretreatment and processing. It can save energy and reduce emissions, and has good economic and social benefits. It can be widely used in biomass power plant, biomass steam boiler, domestic fireplace, drying stove and biomass gasifier, etc. It is an efficient and clean renewable energy.
4-6 T/H Palm Waste Biomass Pelleting Line


Jiangsu Liangyou Zhengda Co., Ltd. specializes in the production of complete biomass pellet fuel forming equipment, can provide customers with logs, wood chips, shavings and other raw materials of biomass pellet production line; Biomass granulation production line with building template, woodworking scrap and other raw materials; Complete biomass pelleting production line with corn straw, wheat straw and straw grass as raw materials; Complete biomass pelleting production line with fruit shell, fruit residue and palm as raw materials; Complete biomass pelleting production line with crop waste, sludge, coal and other raw materials, tailor-made complete equipment solutions for customers, to meet the different needs of customers.
Now take the production line project of 4-6tph Palm waste granulation production line as a case, according to the technological process and each section to do the following introduction and explanation.

Raw material
There are mainly palm shell, palm leaf, and palm fruit channeling EFB,etc.

Flow process brief introduction
Palm waste is coarsely crushed through a drum beater and then cut into fine powder through a special palm cutter. Then, after the pre-cleaner, the raw material with 50% moisture entering the 3 layers drum dryer, is dried into about 15% moisture. and finally is pelleted. The diameter of the finished product is 6-10mm, which is optional. After the pelleting and cooling, it is packed into 20-50kg/bag by the small bag packing scale which is convenient to transport and sell. Palm pelleting complete project with 5tph, the total power is be around 890kw. The workshop covers an area of 2400 , contains raw material and finished products warehouse; The design of the whole line is compact, reasonable, meets the requirements of environmental protection, and can be customized according to customer requirements.

Flow process diagram
Grinding process→Cleaning process→Drying process→Pelleting process→Cooling and bagging process
4-6 T/H Palm Waste Biomass Pelleting Line

Craft features and process introduction
Grinding process
The palm shell, palm leaf, palm fruit channeling go through the drum beater first, the long fiber shape palm silk is roughly grind ed into 5-10cm long. Then cut into the palm grass powder by the special palm cutter. After grinding, the material is transported by the fan's negative pressure suction air pressure, with high output, low pollution and effective inhibition of dust pollution in the workshop.
4-6 T/H Palm Waste Biomass Pelleting Line


cleaning process
The purpose of the complete palm-pelleting project in the cleaning process is to clean up the major impurities in the raw materials, so as to avoid the failure or damage of the mechanical equipment and conveying equipment in the next process.
Cleaning equipment: MCY160*300, power 3kw, design output: 6tph
4-6 T/H Palm Waste Biomass Pelleting Line


Drying process
Three layer drum dryer. After drying, the moisture content of sawdust is around 13-18%.
Drying equipment: LYHG50, roller diameter of 3m, length of 11.6m, power of 19kw, designed output 5tph (original moisture of raw material is 50%).
4-6 T/H Palm Waste Biomass Pelleting Line


Pelleting process
The diameter of biomass particles is 6-10mm, which is optional. And the biomass particles have the characteristics of high calorific value, no pollution and low ash content, which can be widely used in biomass power plants, biomass steam boilers, household fireplaces, drying furnaces and biomass gasifier, etc.
Granulating equipment(5sets): MZLH420, host power: 90kw, power of mandatory feeder: 0.75kw, designed output: 1t/set

4-6 T/H Palm Waste Biomass Pelleting Line
Cooling and bagging process
To reduce particle temperature and decrease grain moisture. The pellet after cooler is not higher than room temperature 5 ºC, pellet moisture after cooled is around 8-10%, particle density 650-750 kg/m3.
The bagging scale is according to the customer's local sales needs, the appropriate packing scale is selected to facilitate the customer to sell products. There are usually two specifications: small bag and ton bag. 20-50kg/bag for small bags, 500-1000kg/bag for ton bags.
Cooling equipment: SKLB4, cooling room volume:4m3, Design output 5-6tph.
Packing equipment: SDBLY-K, packing range: 20-50kg/ bag, 3-5 bags/min.
4-6 T/H Palm Waste Biomass Pelleting Line


According to the needs of different customers, the scheme can be optimized
1. If necessary, buffer bins can be added between each section to replace the storage yard. The advantage is that it can improve the automation degree of production line and reduce dust pollution in the workshop; The disadvantage is that it will increase the construction cost of the production line, and because the bulk density of materials after crushing is very light, it is easy to bridge in the bins and material does not drop.
2. f the moisture content of the raw material is not higher than 15%, you can not use the dryer. It can be pelleted directly after grinding; If more than 15% but less than 20%, you can consider mixing dry materials with wet materials, making water neutralization and reduction, and then granulation;
3. The packaging equipment can be adjusted according to customers' requirements for finished product packaging. It can also be stored in bulk or stored into silos.

About us

As a Chinese listed company and a national high-tech enterprise, (FDSP) is a large-scale manufacturing system solution provider for feed machinery, biomass machinery, fertilizer machinery, storage machinery and complete sets of projects. Has served in Europe, Africa, Australia, South America, Southeast Asia, the Middle East and more than 30 countries and regions.
The products have obtained ISO9001:2015 international quality system certification, EU national CE certification for biomass energy equipment and its complete production line, Russian GOST-R certification, and 6 years of SGS field certification. Reliable and reliable.
We have a professional technical team to customize your own system solutions, providing one-stop services from pre-design, manufacturing to post-construction, maintenance and so on. Committed to providing "safe, reliable, energy-saving" stand-alone products to customers around the world, we are committed to creating high-quality, low-energy, strong and stable quality projects, and continuously create more and greater value for our customers.
4-6 T/H Palm Waste Biomass Pelleting Line

FDSP biomass engineering show
4-6 T/H Palm Waste Biomass Pelleting Line


Packaging:Depending on customers' requirement,such as wooden box or Iron crate etc.
Shipping:Our shipping operator and delivering equipment will be ready on time to ensure goods shipped based on Sales Order requirement.
4-6 T/H Palm Waste Biomass Pelleting Line

FAQ
1.Q: How can I trust on your quality?
Answer: 
1). All of the machine be tested successfully in Liangyou workshop before shipment. 
2). The working lifespan of Liangyou machines is at least 20 working years.

2. Q: Does your company provide Engineers Abroad Service?
Answer: Sure, we provide it. And we can provide free training for on-site workers.

3. Q: How to train our staff about operation and maintenance?
Answer : We will provide every detailed technical instructive, pictures, videos to teach them for the operation and maintenance. In addition, our engineers for guide assembly will teach your staff on site.

4. Q:What shipment terms you offer?
Answer: We can offer FOB, CIF, CFR etc based on your request.

5. Q:What payment terms you take?
Answer: T/T, LC ,D/A,D/P etc.

You Might Also Like