China 400kw Rmrs Approved Marine Diesel Generator Powered by Cummins Engine., Find details about China Marine Diesel Generator Set, Marine Power Generator Set from 400kw Rmrs Approved Marine Diesel Generator Powered by Cummins Engine.
Marine Diesel generator Specification | |
General features: | |
Coupled with Cummins diesel engine and Stamford alternator | |
24V DC start/Air start | |
CCS, DNV, ABS, RS, LINA, BV marine register approved | |
Section A | |
Diesel generator Technical Specification | |
Generator Set Model: | CCFJ400J |
Prime Output Power: | 400kw |
Overload | 10% |
Voltage | 400 VAC |
Frequency | 50Hz |
Speed | 1500 rpm |
P.F. | 0.8 |
Governor Type: | Electrical type |
Dimension(mm) | 3200*1250*1950 |
Weight(Kg) | 4800 |
Section B | |
Technical Specification of Engine | |
Engine brand: | Cummins |
Engine Model: | K19-DM |
Power Rating | 448KW @ 1500 RPM |
Configuration | Cast iron, in-line, 6-cylinder |
Displacement, L | 19 |
Compression ratio | 14.5:1 |
Aspiration | Turbocharged |
Fuel system | Direct injection |
Bore* stroke, mm | 159*159 |
Rated speed, rpm | 1500 |
Governor type | Electronic |
Starting voltage | 24V, negative ground |
Fuel oil Consumption | ≤209 g / kW•h |
Cooling type | Sea water pump and heat exchange |
Section C | |
Technical Specification of Alternator | |
Alternator brand | Stamford |
Main Alternator Model | HCM 5D |
Configuration of Main Alternator | Brushless,PMG,Single bearing,Air cooling |
Brand | STAMFORD |
Capacity | 400KW |
Voltage | 230/400V |
Frequency & Speed | 50HZ/1500RPM |
Power factor | 0.8 |
Voltage Adjust range | ≥5% |
Voltage Regulation NL-FL | ≤±0.5% |
Insulation Grade | Class H |
temperature system | Class F |
Protection Grade | IP23 |
Section D | |
Technical Specification of Control panel | |
Control system | Comap ID DCU MARINE matching with complete set of Danfoss sensor |
The InteliDrive DCU Marine is an engine controller designed specially to meet the demanding needs of the marine market, providing a high level of performance coupled with extensive communication capabilities and incorporating hardwired safety functions and primary/secondary power switching. The controller is easily integrated into the ship's control system and takes on board the full communication capabilitywith electronic engines. ComAp developed this capability for their market leading gen-set controllers through the use of J1939 and redundant J1587 communication buses. This engine specific approach enables InteliDrive DCU Marine to communicate fully with the engine's Electronic Control Unit (ECU), delivering a greater range of values and most importantly delivering all diagnostic information in intelligible plain text, instead of potentially misleading cryptic codes or flashing lights. The unit provides users with a highly flexible solution, featuring configurable inputs and outputs, allowing the controller to be customized to a particular application or requirement without complicated programming. |
Marine Diesel generator | |||||
Model | Power | Engine model | Stamford | Dimension MM | Weight KG |
Model | |||||
4B-CP30DM/5 | 30KW | 4BTA3.9-GM47 | UCM224D | 1660*770*1200 | 810 |
4B-CP40DM/5 | 40KW | 4BTA3.9-GM47 | UCM224E | 1660*770*1200 | 920 |
6B-CP50DM/5 | 50KW | 6BT5.9-GM83 | UCM224F | 1850*850*1250 | 1,050 |
6B-CP64DM/5 | 64KW | 6BT5.9-GM83 | UCM274C | 1900*850*1250 | 1,060 |
6B-CP70DM/5 | 70KW | 6BT5.9-GM83 | UCM274D | 2000*850*1250 | 1,080 |
6B-CP80DM/5 | 80KW | 6BTA5.9-GM100 | UCM274D | 2000*850*1250 | 1,100 |
6B-CP90DM/5 | 90KW | 6BTA5.9-GM100 | UCM274E | 2000*850*1250 | 1,120 |
6C-CP100DM/5 | 100KW | 6CT8.3-GM115 | UCM274F | 2200*950*1450 | 1,560 |
6C-CP120DM/5 | 120KW | 6CTA8.3-GM155 | UCM274G | 2300*950*1450 | 1,630 |
6C-CP140DM/5 | 140KW | 6CTA8.3-GM155 | UCM274H | 2300*950*1450 | 1,690 |
N855-CP180DM/5 | 180KW | N855-DM | HCM 434D | 3000*1050*1550 | 2,500 |
N855-CP200DM/5 | 200KW | N855-DM | HCM 434E | 3000*1050*1550 | 2,650 |
N855-CP250DM/5 | 250KW | N855-DM | HCM434E | 3000*1050*1550 | 2,800 |
N855-CP280DM/5 | 280KW | N855-DM | HCM434F | 3000*1050*1550 | 2,950 |
K19-CP300DM/5 | 300KW | K19-DM | HCM534C | 3200*1250*1950 | 4,400 |
K19-CP360DM/5 | 360KW | K19-DM | HCM534D | 3200*1250*1950 | 4,600 |
K19-CP400DM/5 | 400KW | K19-DM | HCM534E | 3200*1250*1950 | 4,800 |
K38-CP600DM/5 | 600KW | K38-DM | HCM634H | 3970*1500*2100 | 7,700 |
K38-CP800DM/5 | 800KW | K38-DM | PM734B | 3970*1500*2100 | 8,000 |
K38-CP1000DM/5 | 1000KW | K50-DM | PI734D | 3970*1500*2100 | 10,000 |