Easy Dispersion Organophilic Bentonite Organoclay for Oil Drilling Fluids
China Easy Dispersion Organophilic Bentonite Organoclay for Oil Drilling Fluids, Find details about China Bentonite, Organic Bentonite from Easy Dispersion Organophilic Bentonite Organoclay for Oil Drilling Fluids
Basic Info.
Model NO.
HL-06C
Dry Powder Fineness (-200 Mesh)
More Than or Equal to 95.0
Viscosity
More Than or Equal to 2.5
Trademark
Helenbo
Transport Package
Brown Paper Bag
Specification
Organic modified bentonite
Origin
Anhui, China
HS Code
382499
Model NO.
HL-06C
Dry Powder Fineness (-200 Mesh)
More Than or Equal to 95.0
Viscosity
More Than or Equal to 2.5
Trademark
Helenbo
Transport Package
Brown Paper Bag
Specification
Organic modified bentonite
Origin
Anhui, China
HS Code
382499
Product Desciption
HL-06C Product Introduction
HL-06C organic bentonite is a high purity montmorillonite modified by organic cations ,which is hydrophobic and oil-affinity rheological additive.
It is suitable for low and medium polarity coatings, i.e. aliphatic hydrocarbons and aromatic hydrocarbons. It has a high cost performance for low and medium polarity coatings.
Product Features
Application
Industrial anticorrosive coating
Architectural coating
Industrial coating
Wood primer
Printing ink
Other systems such as unsaturated polyester system
Main characteristics
Effective provision of viscosity at low shear in the system
Good thixotropic properties
Preventing Pigment and Filler Settlement during Storage
It can prevent the layering of coatings and the precipitation of supernatant liquor
Good batch stability
Higher cost performance
Usage and dosage
It is suggested that it should be added in the grinding stage. The specific production process is as follows:
Prerequisites: high-speed dispersion
Methanol/water(95/5) 30%-35%
Ethanol/water(95/5) 30%-40%
Propylene carbonate(95/5) 40%-50%
It is suggested to use polar activated carbon containing 5% water to achieve the best activation effect.
HL-06C prepared pregel can get the best performance under full dispersion. It is suggested that HL-06C should be added to solvent-based coatings under the condition of high speed dispersion, and the best anti-sagging and anti-sinking effect can be obtained after full activation.
HL-06C can also be added directly in the process of using. After high-speed dispersion, the best anti-sagging and anti-sinking effect can be obtained.
Dosage
The amount of HL-06C added depends on the type of organic, the degree of thickening and other rheological properties.
The use of HL-06C is 0.2%-2.5% of the weight ratio of the whole system. The optimum dosage must be determined through the experimental process.
Efficient dispersing equipment and technology can better optimize the performance of HL-06C, reduce the effect of usage, and achieve maximum economic benefits.
Accurate dosage should be determined in order to obtain the best effect.
Factory
Equipment
Exhibition
HELENBO FAQ
1)Are you the factory or the trading company?
We are the factory.For more information,pls visit our website:http://hlb-organobentonite.en.made-in-china.com
2)What' the payment terms:
a.30% deposit before production,70% balance money before shippment by TT
b.100% T/T
c.L/C at sight
d.Western Union
3) How about the delivery time:
7 days according to the different quantity.
4) How about the sample?
Pay by customer.
5) How about the customer's own logo?
We can produce according to customer's requirement.
6) When will the customer receive our reply.
We will reply you within 24 hours
7) What's our company's advantage?
We are the professional factory of organic bentonite.Competitive price,Best quality,Quick delivery time and Best service.
HL-06C organic bentonite is a high purity montmorillonite modified by organic cations ,which is hydrophobic and oil-affinity rheological additive.
It is suitable for low and medium polarity coatings, i.e. aliphatic hydrocarbons and aromatic hydrocarbons. It has a high cost performance for low and medium polarity coatings.
Product Features
Application
Industrial anticorrosive coating
Architectural coating
Industrial coating
Wood primer
Printing ink
Other systems such as unsaturated polyester system
Main characteristics
Effective provision of viscosity at low shear in the system
Good thixotropic properties
Preventing Pigment and Filler Settlement during Storage
It can prevent the layering of coatings and the precipitation of supernatant liquor
Good batch stability
Higher cost performance
Usage and dosage
It is suggested that it should be added in the grinding stage. The specific production process is as follows:
Prerequisites: high-speed dispersion
- Resin/solvent (Pre mixing)
- HL-06C Organic Bentonite(high-speed dispersion for 10 minutes)
- Polar activator(high-speed dispersion for 5-10 minutes)
- Surface active agent(If it exists)
- Pigments(Grinding to required fineness)
- Paint correction
Methanol/water(95/5) 30%-35%
Ethanol/water(95/5) 30%-40%
Propylene carbonate(95/5) 40%-50%
It is suggested to use polar activated carbon containing 5% water to achieve the best activation effect.
HL-06C prepared pregel can get the best performance under full dispersion. It is suggested that HL-06C should be added to solvent-based coatings under the condition of high speed dispersion, and the best anti-sagging and anti-sinking effect can be obtained after full activation.
HL-06C can also be added directly in the process of using. After high-speed dispersion, the best anti-sagging and anti-sinking effect can be obtained.
Dosage
The amount of HL-06C added depends on the type of organic, the degree of thickening and other rheological properties.
The use of HL-06C is 0.2%-2.5% of the weight ratio of the whole system. The optimum dosage must be determined through the experimental process.
Efficient dispersing equipment and technology can better optimize the performance of HL-06C, reduce the effect of usage, and achieve maximum economic benefits.
Accurate dosage should be determined in order to obtain the best effect.
Factory
Equipment
Exhibition
HELENBO FAQ
1)Are you the factory or the trading company?
We are the factory.For more information,pls visit our website:http://hlb-organobentonite.en.made-in-china.com
2)What' the payment terms:
a.30% deposit before production,70% balance money before shippment by TT
b.100% T/T
c.L/C at sight
d.Western Union
3) How about the delivery time:
7 days according to the different quantity.
4) How about the sample?
Pay by customer.
5) How about the customer's own logo?
We can produce according to customer's requirement.
6) When will the customer receive our reply.
We will reply you within 24 hours
7) What's our company's advantage?
We are the professional factory of organic bentonite.Competitive price,Best quality,Quick delivery time and Best service.
You Might Also Like
20 Inch Industrial Big Blue RO Water Filter
Wholesale Quantum Board 220W LED Grow Light for Grow Tent
Gl-II 200m Water Well Drilling Rig Wells Drilling Machine
Hot Sale Product 2021 DC Current Motor Arc Welding Machine O......
Sodium Stearoyl Lactylate ( SSL /CSL)
PC200-6 Excavator Hand Throttle Controller Manual 7834 -27-2......
Sound DJ Bass Speaker SA208b (DSP) PA Speaker System Profess......
Plastic LED Furniture Big Lamp for Nightclub
Kids Silicone Bowl Cup Baby Plastic Food Feeding Bowl
49S CRYSTAL RESONATOR 4.000MHz
Blr/Ek- 053s Refrigeration Line Filter Drier