Products

Organoclay for Solvent-Based Systems of Low, Medium and High Polarity.

China Organoclay for Solvent-Based Systems of Low, Medium and High Polarity., Find details about China Bentonite, Organic Clay from Organoclay for Solvent-Based Systems of Low, Medium and High Polarity.

Model NO.
BK-138
Trademark
Jingyi
Specification
25KG/BAG
Origin
Huzhou, Zhejiang
Model NO.
BK-138
Trademark
Jingyi
Specification
25KG/BAG
Origin
Huzhou, Zhejiang
BK-138 is an organoclay (tetraallkyl ammonium bentonite) for solvent-based systems of low,medium and high polarity.

1. Advantages: 
☆ High gelling efficiency over low, medium and high polarity organic liquids, especially in 200#solovent oil, coal tar, aromatic compounds.
☆ Produce reproducible thixotropic consistency over a wide temperature range. 
☆ High viscosity and excellent thickening property over a wide temperature range.
☆ Imparts particle suspension, preventing hard settling of pigment and fillers.
☆ Exerts strong film reinforce action in organic binder systems.
 
2. Typical Properties: 
ColorAppearanceDensityMoisture
(@105ºC,2hrs)		Fineness through 200 meshLoss on Ignition
( @1000ºC )
whiteFree Flowing Powder1.7g/cm3≤3.5%≥98%≤38%
 
3. Typical Applications: 
Alkyd paintZinc-rich paint
Anti-corrosion paintInks(mineral oil)
Bituminous paintInks(Nitro)
Chlorinated rubber paintAdhesive
Marine paintPutties and sealant
None solvent epoxy paintLubricating grease
Primer paintOil drilling mud
Road paintWaster water treatment
Silica paint 
   
4. Incorporations:
BK-138 belongs to the unconventional type of organoclays group, being an easy-to-disperse, self-activated organoclay, BK-138 does not require a chemical (polar) activator to reach the proper level of delamination of the organoclay platelet stacks.  
BK-138 can be added at any point in the manufacturing process. If addition is made with polar activator or after grinding,better performance can be expected.

5. Recommended Levels:
The amount of BK-138 rheology modifier required depends upon the type of organic system and the degree of thickening or other properties desired. Addition levels are typically between 0.1%-0.8% based on the total formulation weight.

6. International Countertypes: Bentone®34, Bentone®38, Bentone®27


   
Organoclay for Solvent-Based Systems of Low, Medium and High Polarity.

You Might Also Like