Solvent Based Organoclay Rheological Additive CP-180

CP-180 is an organo clay (modified montmorillonite), designed especially for use in solvent based system including intermediate and low polarity range organic liquid.

Advantages

Exerts gelling efficiency over a wide range of intermediate and low polarity.
Easy dispersing.
The gel is colourless and of high clarity.
Produce reproducible thixotropic consistency over a wide temperature range
Imparts particle suspension, sag resistance without impairing flow and leveling, preventing hard settling of pigment and fillers.
Exerts strong film reinforcing action in organic binder systems.

Typical properties

CompositionOrganic derivative of a montmorillonite clay
AppearanceFine white powder
Moisture content(105º C, 2hr)≤ 3.5%
Loss on ignition, %(1000º C)27%-30%
Bulk density0.53G/cm3
Fineness (200 mesh)≥ 98%

Application

Transparent coatings
Lubricant Grease, ink, sealant.
Cosmetic.
Nano-composite.
Replacement of fumed silica.

Using
CP-180 disperses under high shear and requires a polar activator (30%~40%) for best efficiency. Heat is not required to obtain good dispersion. Addition levels are typically in 0.2%~2.0%. Polar activator (95% Ethanol or 95% Methanol) is needed. Normally addition level of polar activator is recommended to be 30%~40% of CP-180 in weight.

It is substitute of Bentone 38 and Claytone 40.