Flotation Cell Machine Application:

Flotation machine is applicable for separating non-ferrous metal, black metal, noble metal, non-metal mineral, raw body and materials of chemical industry, which are subject to coarse separation, swept separation, fine separation and floatation, so the useful ore are reclaimed.

To check the bolts before starting the machine ,to use hand instead of impellers to prevent the sedimentfrom adding the burden of electromotor. To adjust the height of strobe carefully to keep the stabilization of liquid level and scrape the mineralized froth to the launder.  The impellers and stators should have a distance and should be changed when they are worn. The bearing in the pump should be maintained every three months.

Brief introduction

flotation machine can separate air drive flotation machine and inflation flotation cell .

We have XKJ type, SF, XCF-KYF, BF, BS-K, BSF, JJF,  XJQ, for you choose.
 

Functional Features:

Raise the exquisite article by 4-6%

Raise the recovery rate by 8%

Raise a yield by 12%

 

 

Working Principle and Features of SF Flotation Machine:

The flotation machine has the advantages of large air-absorption capacity and low energy consumption. Every cell owns three functions: air absorption, slurry absorption, and floatation separation, and the cells form a floatation separation loop by itself without any auxiliary equipment, and is allocated horizontally, which favors the change of flow. The circulation of mineral slurry is reasonable, and can avoid the disposition of coarse sand to the largest extent. There is self-control device on the surface of mineral slurry, so it is easy to adjust it. The impeller has backward-inclined upper and lower vanes, which produce upper and lower circulation of mineral slurry

Specifications
1. ISO9001: 2008 certificate
2. Best for copper, gold, lead, zinc upgrading
3. Large adsorption capacity
4.57years experience

Mechanical Agitating Flotation Machine With Auto Air Suction
New structure of impeller is backwards inclined double impellers equipped with honeycomb duct and dummy bottom. Therefore, the slurry in the tank will cycle upward and downward in a fixed flow manner, which is helpful to the suspension of those coarse particles. Air and slurry are naturally sucked without need for foam pump.