Products

Pneumatic Mechanical Agitating Flotation Machine for Ore Dressing Production Line

China Pneumatic Mechanical Agitating Flotation Machine for Ore Dressing Production Line, Find details about China Pneumatic Mechanical Agitating Flotation Machine, High Quality Flotation Machine from Pneumatic Mechanical Agitating Flotation Machine for Ore Dressing Production Line

Model NO.
Pneumatic Mechanical Agitating Flotation Machine
HS Code
8474202000
Model NO.
Pneumatic Mechanical Agitating Flotation Machine
HS Code
8474202000
Company introduction
Hebei Jinma Mine Machinery Group Co., Ltd. is a professional manufacturer of "Jinma" metallurgical, mine, construction material and environmental equipment assemblies. Founded in 1971 and reorganized into a joint stock enterprise in 1997, the company consists of Tangshan Mine Machinery Plant, Tangshan Jinma Construction Material Machinery Co., Ltd., Zunhua Jinma Environmental Equipment Co., Ltd. and Zunhua Jinma Mining Co., Ltd. The company covers 50 plus mu of land, with total assets of RMB90 million, some 600 employees including 96 engineering professionals and a variety of processing and testing devices, including large-size processing devices like 10t electric arc furnaces, vacuum casting tools, 8m, 5m and 4m vertical lathes, 8m, 5m and 3.15m hobbing machines, 6m planing machines, fine boring machines and medium-frequency quenching tools, and automatic welding, ultrasonic weld testers, W15-23 material testers and time-dependent vibrators totaling over 300 pieces of equipment. 
The company is conveniently situated in the delta of Beijing, Tianjin and Tangshan where it is endowed with advantaged physical location and sound accessibility. Our president Mr. Duan Zhiyu and general manager Ms. Duan Chunhong together with all the company staff are looking forward for cooperating with all friends in and out of China.
Pneumatic Mechanical Agitating Flotation Machine for Ore Dressing Production Line

Introduction
Flotation machine is applicable to grading of non-ferrous and ferrous metal, also applicable to grading of nonmetals, such as coal, fluorite and talc. The impeller of flotation machine is driven by motor v-belt, centrifugal effect is thus produced and negative pressure is formed, which, on the one hand, absorbs adequate air to mix with ore pulp, and on the other hand, stirs the ore pulp and mixes the ore pulp with medicines and refine bubbles; thus, the minerals will be adhered to the bubbles and float to the pulp surface and form foam layer. Adjust the opening of flash board and cone valve and control the liquid level to make the useful bubbles scraped out by scraper blade. For selection of flotation machines, the following information shall be indicated: Models, specifications and number of flotation cells. Number of scraper blade devices (left or right). Single-side scraping or double-side scraping. Numbers of feed boxes, middling boxes, tailing boxes, feed pipes and middling pipes. Liquid level can be controlled manually, electrically or automatically. Deployment diagram of flotation technological process should be provided.
Features
XCF II /KYF II flotation machine is the flotation machine further developed based on XCF/KYF flotation machine. It adopts relatively deep U-shaped cell; hollow shaft for aeration and suspended stator; the blade of impeller is inclined to a degree, with little pressure head, large circulation volume, low power consumption and simple-structured new-type impeller; air distributor of porous circular shape was installed in the cavity of impeller to make air dispersed homogeneously. There are two models designed: XCF II and KYF II. XCF II flotation machine: able to absorb pulp; can serve as the suction cell for job steps of roughing, scavenging and concentration, and should be deployed together with KYF II flotation machine. There is no need for foam pump for returning of middlings. KYF II flotation machine: not able to absorb pulp; when it is deployed for independent operation, the preceding and subsequent job steps should be deployed step-wise with a drop of 300-500mm. The returning of middlings counts on the pumping of foam pump. If it is deployed together with XCF II flotation machine, KYF II flotation machine can serve as the green cell for job steps of roughing, scavenging and concentration; they are deployed horizontally and there is no need for foam pump for returning of middlings.The scraping mechanism of XCF II /KYF II flotation machine is divided into single-side scraping or double-side scraping, and the user can select from the two types according to the process requirements. 
Main features:
Large aeration quantity, uniform gas dispersion, low energy consumption and saving 30~50% electricity compared with common flotation machine. Simple structure and convenient for maintenance. Low wear of quick-wear parts such as impeller and stator, saving 70~80% cost. Good circulation performance of ore pulp, low consumption of agents, saving 10~15% consumption. The combined unit can form flotation circuit by being deployed on the same horizontal level with no need for foam pump. If the user has requirements for automatic control device for the control of ore pulp and aeration quantity, multiple automatic control functions can be realized by manual/automatic switching and onsite/centralized control.
Application:
This machine is suitable for various flotation operations of roughing, scavenging and concentration of metal and non-metallic ores. The chosen range of material particle sizes is 0.3~0.01mm, and it is suitable for flotation of relative coarse ore particles.
Parameter

Models

  Effective volume

 Dimensions of cell

 (L x W x H)

 Diameter of impeller

 Installed power

 Min. wind pressure at the inlet

 Adjusting range of  aeration quantity

 Production capacity

 Single cell weight

 

m2

m

m

kw

kpa

m³/(m2.min)/(m'.min)

m³/min

kg

XCFII/KYFII-1

1

1.00×1.00×1.10

0.40/0.34

4/3

>11

0.05-1.4

0.2-0.5/0.2-1

920/1056

XCFII/KYFII-2

2

1.30×1.30×1.25

0.47/0.41

5.5/4

>12

0.05-1.4

0.5-1/0.5-2

1158/1346

XCFII/KYFII-3

3

1.60×1.60 × 1.40

0.54/0.48

7.5/5.5

>14

0.05-1.4

0.7-1.5/0.7-3

2172/2074

XCFII/KYFII-4

4

1.80×1.80×1.50

0.62/0.55

11/7.5

>15

0.05-1.4

1-2/1-4

2375/2100

XCFII/KYFII-6

6

2.05×2.05×1.75

0.62/0.55

18.5/11

>17

0.05-1.4

1-3/1-6

3545/3278

XCFII/KYFII-8

8

2.20×2.20×1.95

0.72/0.63

22/15

>19

0.05-1.4

2-4/2-8

4142/3857

XCFII/KYFII-10

10

2.40×2.40×2.10

0.76/0.66

30/22

>20

0.05-1.4

3-5/3-10

4894/4334

XCFII/KYFII-16

16

2.80×2.80×2.40

0.86/0.74

37/22

>23

0.05-1.4

4-8/4-16

6928/7545

XCFII/KYFII-20

20

3.00×3.00×2.70

0.91/0.78

45/37

>25

0.05-1.4

5-10/5-20

9200/8240

XCFII/KYFII-24

24

3.10×3.10×2.90

0.93/0.80

55/37

>27

0.05-1.4

6-12/6-24

10819/9820

XCFII/KYFII-30

30

3.50×3.50×3.025

0.88/0.90

55/45

>31

0.05-1.4

7-15/7-30

14810/13820

XCFII/KYFII-40

40

3.80×3.80×3.40

1.05

75/55

>32

0.05-1.4

8-19/8-38

18790/17097

XCFII/KYFII-50

50

4.40×4.40×3.50

1.20/1.03

90/75

>33

0.05-1.4

10-25/10-40

22000

XCFII/KYFII-70

70

5.10×5.10×3.80

1.12

90

>35

0.05-1.4

13-50

26200

XCFII/KYFII-100

100

5.90×5.90×4.20

1.26

132

>40

0.05-1.4

20-60

33500

XCFII/KYFII-130

130

6.42×6.62×4.72

1.30

160

>45

0.05-1.4

20-60

36200

XCFII/KYFII-160

160

6.85×7.02×5.02

1.35

160

>48

0.05-1.4

20-60

42500

Workshop

Pneumatic Mechanical Agitating Flotation Machine for Ore Dressing Production LineCorporate Style:


                               

Pneumatic Mechanical Agitating Flotation Machine for Ore Dressing Production LinePneumatic Mechanical Agitating Flotation Machine for Ore Dressing Production LinePneumatic Mechanical Agitating Flotation Machine for Ore Dressing Production Line

Pneumatic Mechanical Agitating Flotation Machine for Ore Dressing Production LinePneumatic Mechanical Agitating Flotation Machine for Ore Dressing Production LinePneumatic Mechanical Agitating Flotation Machine for Ore Dressing Production LinePneumatic Mechanical Agitating Flotation Machine for Ore Dressing Production Line

The company is conveniently situated in the delta of Beijing, Tianjin and Tangshan where it is endowed with advantaged physical location and sound accessibility. Our president Mr. Duan Zhiyu and general manager Ms. Duan Chunhong together with all the company staff are looking forward for cooperating with all friends in and out of China.

 

FAQ to save your precious time!

 

Q1: What's the standard length of your profiles and tube?

A: The standard length of profiles and tube are 5800mm to suit for small container, and we also can cut to specific length, however a surcharge of machining and material scrap cost will be charged accordingly based on each individual invoice.

 

Q2: What's your MOQ?

A: we have no MOQ for our new customers, however a surcharge of USD80 will apply for all orders less that USD 1000 for custom handing cost purpose.

 

Q3: what is your payment terms?

A: The payment terms we accept is T/T or irrevocable L/C at sight, T/T preferred.

 

Q4: What's the lead time for small order and mass production?

A: 1-3 working days for small order, and 3-10 working days for mass production of material, and the final lead time will be subject to each individual invoice.

 

Q5: What certification do you have?

A: We have ISO 9001:2008 certificate.

You Might Also Like