Application:

Submersible pump cable is used for the power cable of ESP units which is installed on land or offshore oil Wells.

Structure:
The cables for submersible oil pump or pump unit can be produced with different types and specifications, the cross-section of conductor is 42mm2 and below. The well temperature is from 50ºC to 180ºC, the max. Continuous working temperature of conductor is 204ºC. The insulation material that can be used is as below: PP, EPR, polyimide-F46, fluoroplastics, XLPE, etc. The material of inner jacket includes NBR, compound of the neoprene and PVC, EPR, fluoroplastics, lead, etc. The outer sheath material is as the galvanized steel tape, stainless steel tape, etc. 

Configuration:

Conductor -- Solid or stranded tinned copper

Insulation -- EPDM/EPR

Sheath -- EPDM/EPR

Barrier -- Oil resistant or braid tape Layer(Separator)

Armor -- Galvanized Steel/stainless Steel/Monel interlocked tape armor
 

3kV Type
 

6KV Type

AWG sizes are approximate equivalent values. The actual cross-section is in mm².

Submersible oil pump power cable is used for submersible oil motor power supply. inculde round and flat, also could be buildup by all the power cable types together with different stainless steel pipe/tube  sizes.