Products

Black Finish Monel 400 Nickel Alloy Round Bar for Frames

China Black Finish Monel 400 Nickel Alloy Round Bar for Frames, Find details about China Monel 400 Round Bar, Monel 400 from Black Finish Monel 400 Nickel Alloy Round Bar for Frames

Model NO.
Monel 400, 2.4360, UNS N04400
Diameter
3-300mm
Surface
Black, Bright, Polished, Pickling
Length
as Your Requirments
MOQ
100kgs
Sample
Free-Sample
Condition
Annealed;Heat Treatment;
Technique
Cold Rolled, Hot Rolled
Mtc
Cold Drawn Hot Rolled,Forged
Stock
in Stock
T.S
517
Key Words
Monel 400 Round Bar
Trademark
ZYTC
Transport Package
Wooden Package
Specification
Monel 400
Origin
China
HS Code
7502200000
Model NO.
Monel 400, 2.4360, UNS N04400
Diameter
3-300mm
Surface
Black, Bright, Polished, Pickling
Length
as Your Requirments
MOQ
100kgs
Sample
Free-Sample
Condition
Annealed;Heat Treatment;
Technique
Cold Rolled, Hot Rolled
Mtc
Cold Drawn Hot Rolled,Forged
Stock
in Stock
T.S
517
Key Words
Monel 400 Round Bar
Trademark
ZYTC
Transport Package
Wooden Package
Specification
Monel 400
Origin
China
HS Code
7502200000


Black Finish Monel 400 Nickel Alloy Round Bar for Frames
Black Finish Monel 400 Nickel Alloy Round Bar for Frames

BS AMS Standard Monel 400 Nickel Based Alloy Bar for Frames for eyeglasses

MaterialMonel/Inconel/Hastelloy/Duplex Steel/PH Steel/Nickel Alloy
ShapeRound,Forging,Ring,Coil,Flange,Disc,Foil,Spherical,Ribbon,Square,Bar,Pipe,Sheet
 
 
 
 
 
 
 
 
 
 
Grade		Duplex: 2205(UNS S31803/S32205),2507(UNS S32750),UNS S32760(Zeron 100),2304,904L
 Others:253Ma,254SMo,654SMo,F50(UNSS32100)F60,F61,F65,1J22,N4,N6 etc
 Alloy : Alloy 20/28/31
 Hastelloy:HastelloyB/ -2/B-3/C22/C-4/S/ C276/C-2000/G-35/G-30/X/N/g
 Hastelloy B / UNS N10001,Hastelloy B-2 / UNS N10665 / DIN W. Nr. 2.4617,Hastelloy C,
Hastelloy C-4 / UNS N06455 / DIN W. Nr. 2.4610,Hastelloy C-22 / UNS N06022 / DIN W. Nr. 2.4602,
Hastelloy C-276 / UNS N10276 / DIN W. Nr. 2.4819,Hastelloy X / UNS N06002 / DIN W. Nr. 2.4665
 Haynes: Haynes 230/556/188
 Inconel 600/601/602CA/617/625/713/718/738/X-750,Carpenter 20
 Inconel 718 / UNS N07718 / DIN W. Nr. 2.4668,Inconel 601 / UNS N06601 / DIN W. Nr. 2.4851,
Inconel 625 / UNS N06625 / DIN W. Nr. 2.4856,Inconel 725 / UNS N07725,Inconel X-750 / UNS N07750 / DIN W. Nr. 2.4669,Inconel 600 / UNS N06600 / DIN W. Nr. 2.4816
 Incoloy: Incoloy 800/800H/800HT/825/925/926;
 GH: GH2132,GH3030,GH3039,GH3128,GH4180,GH3044
 Monel: Monel 400/K500/R405
 Nitronic: Nitronic 40/50/60;
 Nimonic: Nimonic 75/80A/90/A263 ;
 
 
Specification		Wire: 0.01-10mm
Strip: 0.05*5.0-5.0*250mm 
Bar: φ4-50mm;Length 2000-5000mm
Pipe: φ6-273mm;δ1-30mm;Length 1000-8000mm
Sheet: δ 0.8-36mm;Width 650-2000mm;Length 800-4500mm
 
 
Product 
Characteristics		1.According to the preparation process can be divided into deformation superalloys, 
casting superalloys and powder metallurgy superalloys.
2.According to the strengthening mode, there are solid solution strengthening type, precipitation 
strengthening type, oxide dispersion strengthening type and fiber strengthening type, etc..
StandardGB,AISI,ASTM,DIN,EN,SUS,UNS etc
InspectionISO,SGS,BV and so on.
 
Application		High temperature components such as turbine blades, guide vanes, turbine disks, 
high pressure compressor disks,machine manufacturing
and combustion chambers used in the manufacture of aviation, naval and industrial gas turbines
 
 
Packaging		1. cases packed in wooden cases
2. paper packaging
3. plastic packing
4. foam packaging
Packaging according to customer requirements or products
Delivery7-25days orAccording to the product
 
Payment		L/C,D/A,D/P,T/T,Western Union,MoneyGram,According to customer requirements payments
for offline orders.

Introduction

MONEL nickel alloy is a solid solution alloy that can be hardened by the process of cold working.

MONEL is a trademark of Special Metals Corporation under which a series of nickel-copper alloys are grouped. Commercially there are many types of MONEL available, such as alloy 400, alloy 401, alloy R-405, Alloy K-500 and Monel 404.

The Monel 400 alloy is also known as super alloy monel. This alloy is available in some standard shapes such as hexagon, round, tube, pipe, plate, strip, sheet and wire.

The proportions of copper and nickel used to make monel are the same as that found in the nickel ore found in Ontario mines. This alloy exhibits good corrosion resistance. This datasheet will look into the chemical composition, properties and applications of MONEL 400 alloy.

Chemical Composition

The chemical composition of MONEL 400 alloy is given in the following table.

ElementContent (%)
Nickel, NiRemainder
Copper, Cu28-34
Iron, Fe2.5 max
Manganese, Mn2 max
Silicon, Si0.5 max
Carbon, C0.3 max
Sulphur, S0.024

Physical Properties

The following table discusses the physical properties of MONEL 400 alloy.

PropertiesMetricImperial
Density8.8 gm/cm30.318 lb/in3

Mechanical Properties

The mechanical properties of MONEL 400 alloy are tabulated below.

PropertiesMetricImperial
Tensile strength(annealed)517-620 MPa75-90 ksi
Yield strength172-345 MPa25-50 ksi
Modulus of elasticity179 GPa26000 ksi
Poisson's ratio0.32

0.32

Some of the other designations that are used to denote MONEL 400 alloy are as below:

  • AMS 4574
  • AMS 4675
  • AMS 4731
  • ASTM B163
  • ASTM B165
  • ASTM F96
  • UNS N04400

  • Fabrication

    Machinability

    The machinability of MONEL 400 is difficult as it work-hardens during machining. The conventional machining techniques used on iron alloys may be used for this alloy.

    Welding

    Welding methods including gas-arc welding, metal-arc welding, gas-metal-arc welding and submerged-arc welding are recommended on this alloy.

    Forging

    Forging of this alloy is to be done by controlled procedures.

    Hot working

    Hot working on this alloy needs to be done by choosing proper temperatures. Typical temperatures for hot working range between 648-1176°C (1200-2150°F).

    Cold working

    Cold working may be done using soft die materials for better finishing.

    Annealing

    MONEL 400 alloy may be annealed at 926°C (1700°F).

    Applications

    The MONEL 400 alloy is used in the following applications:-

    • Marine fixtures, pumps, valves and piping systems for sea water applications
    • Chemical plant equipment
    • Frames for eyeglasses
    • Aerospace applications
    • Musical instruments.

 

Black Finish Monel 400 Nickel Alloy Round Bar for Frames

Black Finish Monel 400 Nickel Alloy Round Bar for Frames
Black Finish Monel 400 Nickel Alloy Round Bar for Frames
Black Finish Monel 400 Nickel Alloy Round Bar for Frames
Black Finish Monel 400 Nickel Alloy Round Bar for Frames
Black Finish Monel 400 Nickel Alloy Round Bar for FramesBlack Finish Monel 400 Nickel Alloy Round Bar for Frames

Q1: Do you accept the trial order ?
A1: Yes,if we have the exactly size in stock.we can delivery even 1 piece/meter .

Q2: Can I have free sample before making orders?

A2: Yes,we can supply free sample as requirement,but buyer needs to pay the freight charges ,the freight fee will return to buyer after making order.

Q3: How do you control the quality ?
A3: MTC and PMI will be sent before shipment,any 3rd party inspection if need .

Q4: How about your delivery time ?
A4: Generally delivery time is 15 working days .

Q5: How can I quickly get the price list ?
A5: Directly click "chat now" or send us email with detail specifications,you will get the official price list in 1 hour .

Black Finish Monel 400 Nickel Alloy Round Bar for Frames

You Might Also Like