Products

Stock Preparation Machine Low Density Impurity Cleaner

China Stock Preparation Machine Low Density Impurity Cleaner, Find details about China Low Density Impurity Cleaner, Low Consistency Cleaner from Stock Preparation Machine Low Density Impurity Cleaner

Model NO.
SHSC42
Product Type
Waste Paper Pulp
Consistency of Input Pulp
0.5-1.0%
Pressure of Inflow Pulp
0.2-0.4 MPa
Trademark
SUN HONG
Specification
make to order
Origin
China
HS Code
8439990000
Model NO.
SHSC42
Product Type
Waste Paper Pulp
Consistency of Input Pulp
0.5-1.0%
Pressure of Inflow Pulp
0.2-0.4 MPa
Trademark
SUN HONG
Specification
make to order
Origin
China
HS Code
8439990000
Stock Preparation Machine Low Density Impurity Cleaner
Stock Preparation Machine Low Density Impurity Cleaner
Product Description:
Low consistency cleaner is suitable for cleaning fiber suspension with the consistency 0.4-1.2%.
It can efficiently remove light impurities,hot melt impurities,heavy impurities,pulp rejects,etc.In addition,it can also remove foamed plastics,cork prior to paper machine.
Advantage
It can efficiently make coarse screen to the waste paper pulp,simplify the processing procedures and reduce power consumption.
Working principle
Pulp stock at 0.5 to 1.0% consistency feed through inlet pipe header to the cleaners and the stock enters the tangential inlet which accelerates the stock to downward centrifugal motion. Contaminants like dirt, shive, and specks with high specific gravity are forced to an outer wall of cone and downward through reject outlet orifice to reject header, the reject is again feeding to the 2nd stage of cleaners.
The cleaned pulp stock rises upward and goes via accepting header to the upstream system, at the bottom of cleaners have dilution water headers with individual elutriation line provided to eliminate the fiber loses.
Features
1.Efficient removal of impurities like dirt, shives, specks and light particles.
2.High wear resistance construction, Bottom ceramic cone.
3.Improved optical cleanliness of paper due to the removal of specks shives & dirt.
4.The small cone diameter resulting in outstanding cleaning efficiency. Proven design for approach flow location.
Main Technical Data
ModelSHSC42
Flow rate of each piece(L/min)380-450
Pressure of inflow pulp(MPa)0.2-0.4
Pressure of outflow pulp(MPa)140-175
Consistency of input pulp(%)0.5-1.0
Exhaust drges rate of each piece(%)10-12%(relative flow rate of input pulp)

You Might Also Like