Product Description:

 Braces particle cutting machine is mainly used in PET, PVC and other high viscosity materials.
The machine can reduce less loss of the viscosity of the raw material. Compared to water-ring cutting, it is not easy to break the article or adhesion. The granules that the Braces particle cutting machine produce are much more uniform and beautiful.

 1.Feeding Machine

 This machine can be used with all kinds of extruders. It can carry plastic are cleaned into the hopper of Extrude. automatic.It can save your labour,ande realize the effect of safety and reliability.

 2.Extruder

 This machine is used to extrude plastic cleaned by high temperature.The extrusion line can be consisted by such accessory machine: main motor, the gear box, the distribution box, the barrel and screw, the dies, vacuum calibration tank. Main Motor is mainly to supply the power. The Gear box transfers the motor to power.The distribution box enlarges the strength of the power and realizes uniformity.Double screws can make low viscosity index consume of raw material and improve production.It also has a Cooling tank making the heat of screw be appropriate.

 3.Mould

 We use plug board type to change nets and keep machine working.The mould is made by 40Cr nitridation .The pressure sensor prompts to change the nets.There also can install a hydraulic equipment to change the nets more quickly.

 4.Water Channel

 The water channel is 4 meters long.Make out article of cooling

 5.Winds drying machine

 Through the double channels strong wind dryer,force drying and cooling article material reach the fast speed effect of shaping up.

 6.Pelletizer machine

 It adopts grain design, accracy is high and can guarantee the rotatory precision and stationery of power, movements of cylinder are controlled by the solenoid valve, the automatic degree is highand  the  noise is low

 Plastic extrusion line/plastic extruder line/extruder/plastic recycling and granulation line