Products

Communication Cable Automatic Wire Cable Coiling Packing and Taping Machine

China Communication Cable Automatic Wire Cable Coiling Packing and Taping Machine, Find details about China Coiling Machine, Wire Coiling Machine from Communication Cable Automatic Wire Cable Coiling Packing and Taping Machine

Model NO.
ZH-500VC
Bearing
NSK, NACHI
Main Electrical Elements
Siemens, Omorn, Schneider
Factory Location
Between Jiangsu and Zhejiang Prov.
Trademark
ZH
Specification
CE
Origin
Dongguan, China
HS Code
8477900000
Model NO.
ZH-500VC
Bearing
NSK, NACHI
Main Electrical Elements
Siemens, Omorn, Schneider
Factory Location
Between Jiangsu and Zhejiang Prov.
Trademark
ZH
Specification
CE
Origin
Dongguan, China
HS Code
8477900000
Communication Cable Automatic Wire Cable Coiling Packing and Taping Machine


Communication Cable Automatic Wire Cable Coiling Packing and Taping Machine

Scope of application of wire cable coiling machine: (operate direction: left hand operating),for 5e, 6e wire and light type insulation cable reserve outlet hole is applied for coiling. 

Cable coiling machine characteristic:
1, Coordinate with active paying-off, figure-eight crossover coiling.
2, Reserved outlet hole for coiling, it is suitable for tapping carton packaging, inner draw thread, not tortuousness, not knot, not influence electrical characteristics.
Communication Cable Automatic Wire Cable Coiling Packing and Taping Machine
Structure specification of cable coiling machine:
A, Motorize paying-off technical parameters:
  1.  Shaftless, movable tip cone, manual type to fasten and loosen wire coil;
  2. 1.5kw Dongguan motor attached #75 reduction gear lifting wire coil;
  3. Apply toφ800~φ1000 coil wire machine for paying-off.(Furnish with diagram please refer to attached diagram in the bottom, clients to make confirmation)
  4. 5.5kw Dongguan vertical type AC motor, #90 reduction gear, Inovance frequency converter control. 
  5. The rack of machine is made of high quality rectangular steel welded, sturdy and durable.
  6. Adopt import NACHI main bearing which made in Japan;
  7.  Fit outφ300 aluminum oscillating wheel tension rack, total in 9;
  8.  Import high accuracy encoder feedback, constant tension of wire; 

B, Tension bumper bracket and meter counting unit:
  1. Convenience for taking-up and shut down; 
  2. Gravitational sliding single board type bumper bracket, 5 single board with φ300 guide wheel, aluminum material.
  3. Assembling single-track meter counting wheel, photoelectricity inductive type meter counting.
Communication Cable Automatic Wire Cable Coiling Packing and Taping Machine
C,  Vertical coiling machine technical parameter:
  1. Spindle motor: 3kw constant DC, Eurotherm controller linkage speed control, Weinview touch screen setup, the maximum rotate speed is 300rpm;
  2. Traversing motor: Japan Panasonic 1.5kw AC servomotor, programming traverse; 
  3. Traversing: servomotor, encoder setting traverse, sliding rail type programming to walk, reserve a draw thread hole (hole size is adjustable through parameter);
  4. Synchronous belt transmission, proportion will be more accuracy;
  5. Aluminum tray is opening and closing type of take-up reel in order to make it operate easily; add a spotlight on the roof, provide a stainless steel platform for packing;
  6. Outer diameter take-up reelφ500, inner diameterφ200, inner width minimum:200m;
  7. Free mechanical spring type accumulator tension rack attached with inlet wire, keep winding constant tension.
  8. Timing meter counting for stop, setting reducing speed when the length of wire almost reached;
Communication Cable Automatic Wire Cable Coiling Packing and Taping Machine

You Might Also Like