Article Number: JL-TV01

With hood without boots, Elasticated cuffs, and elastic ankles; Stitched seams with high visibility

Protection Level
CE Cat. III, Type 4B 5B, 6B CE category III PPE Regulation(EU) 2016/425
Depending on the hazard potential the protective clothing is intended to protect against, PPE is divided into 3 categories: Category I: Basic PPE protects against minimal risks. Category II: PPE that cannot be clearly classified under Category 1 or 3 is assigned to Category 2. Category III: PPE of complex design is intended to protect against danger to life or serious and irreversible injury to health.
Type 1		Completely sealed, gas-tight complete coveralls. EN 943-1:2002 - Protective clothing against liquid and gaseous chemicals, including liquid aerosols and solid particles.
Type 2		Complete coveralls, not gas-tight,for comfortable internal pressure by means of external ventilation. EN 943-1:2002 - Protective Clothing against liquid and gaseous chemicals, induding liguid aerosols and solid particles. Performance requirements for ventilated and non-ventilated gas-tight(Type1)and non-gas-tiqht(Type2)chemical protective suits.
Type 3		For clothing with liquid-tight seams. EN 14605:2005 - Protective clothing against liquid chemicals.Performance requirements for clothing with liquid-tight and spray tight seams.
Type 4		For clothing with spray-tight seams. EN 14605:2005 - Protective clothing against liquid chemicals.Performance requirements for clothing with spray-tight connections.
Type 5		Protection against solid dusts which are hazardous to health. EN 13982-1:2004 - Protective clothing for use against dry particulates.Performance requirements for protective clothing providing protection for the full body against airborne solid particulates. These protective suits fulfill the requirement for Ljmn82/90 < 30 % and Ls8/10 < 15 %.
Type 6		Protection against minor splashing. EN13034:2005 - Protective clothing against liquid chemicals.Performance requirements for chemical protective clothing offering limited protective per-formance against liquid chemicals. The protective suits have undergone the complete testing for suits (5.2)Protective clothing against poisonous dusts.
EN 1073-2:2002		Protective clothing against radioactive dust particles(variant of the testing for type 5 items of clothing)Protective clothing against infective agents.
EN 14126:2003		Protective clothing - Performance requirements and test methods for protective clothing against infective agents (biological pollutants)Antistatic protective clothing.
EN 1149-5: 2008		Performance requirements for protective clothing with antistatic properties:Surface resistivity (< 2.5 x 109 ohm). Pieces of clothing are treated in order to be statically conductive on the inside.

1. Q: Are you a manufacturer or trade company?
A: We are a professional manufacturer with more than 20 years experience.

2. Q: Can you offer OEM/ODM service?
A: Yes. Both OEM and ODM are available. An Independent development department and a fine cost control system are available.

3. Do you accept small/sample orders?
A: Yes. We have a well-trained group to deal with trial orders. You share the same service and will never be impartially treated.

4. How can we confirm a sample before mass production?
A: Give us as detailed information and specification as possible or send us your sample if you have one. Then we would produce the sample for you.

5. What should I do if I cannot get enough information on your web?
A: Please go for our sales team in the 'Contact info'. Any problem will be taken care of.