Products

Electronic Potting Silicone Compound Use for LED

China Electronic Potting Silicone Compound Use for LED, Find details about China Electronic Potting Silicon Rubber, Electronic Potting Silicon from Electronic Potting Silicone Compound Use for LED

Model NO.
HY-9045# silicone rubber
Model Number
Hy-9300, Hy-9315
Mixing Ratio
1:1
Color
Transparent
Pot Life/Working Life
50-60 Mi
Curing Time
5-6 Hours
Minimum Order Quantity
200 Kilogram
Packaging Details
20kg/Drum
Delivery Time
Within 3 Days After Payment Confirmed in Our Bank.
Trademark
Hong Ye silicone rubber
Transport Package
20kg/drum and 200kg/drum
Specification
SGS, RoHS, MSDS, ISO-9001
Origin
China Shenzhen
HS Code
39100000
Model NO.
HY-9045# silicone rubber
Model Number
Hy-9300, Hy-9315
Mixing Ratio
1:1
Color
Transparent
Pot Life/Working Life
50-60 Mi
Curing Time
5-6 Hours
Minimum Order Quantity
200 Kilogram
Packaging Details
20kg/Drum
Delivery Time
Within 3 Days After Payment Confirmed in Our Bank.
Trademark
Hong Ye silicone rubber
Transport Package
20kg/drum and 200kg/drum
Specification
SGS, RoHS, MSDS, ISO-9001
Origin
China Shenzhen
HS Code
39100000

potting LED  addition silicone rubber 


Product Feature

HY-9060# is a kind of low viscosity, Inherent flame resistance, two components addtion cured potting silicone with heat-conducting. It cures with both on room temperature and heated temperature. It has the feature of the higher temperature the faster of the curing time. It can be applied to electronic components for insulation, waterproofing, fixed and flame retardant. The flame retardant UL94-V0 level can be achieved. It mainly applied in electronic components surface with materials of  PC(Poly-carbonate),PP,ABS,PVC, etc. and metal materials.

 

Typical Application

HY-9060# is suitable for

- high powered electronics, 

- DC/DC module and circuit board which requires heat dissipation and high temperature resistance.

It can be broadly used for LED screen, Wind Power Generator, PCB substrate, etc.

 
Electronic Potting Silicone Compound Use for LED

Technical Parameters

Features

Part A

Part B

Before Curing

Appearence

Black Fluid

White Fluid

Viscosisty(25°Ccps)

3000±500

3000±500

Operation features

Mixing Ratio

1-1

Viscosisty(after mixing) (cps)

2500~3500

Pot life(25°C  hr)

2

Curing time (25°C  hr)

8

Curing time(80°C  mins)

20

FeaturesPart APart B
Before CuringAppearanceGray FluidWhite Fluid
Viscosity(25ºCcps)2500±5002500±500
Operation featuresMixing Ratio1:1
Viscosity(after mixing) (cps)2000~3000
Operating Time(25ºC  mins)60-120
Curing time (25ºC  mins)480
Curing time(80ºC  hr)20
 
 
After Curing		Hardness(Shore  A)45±5
Thermal conductivity [W(m·K)]≥0.8
Dielectric Strength(KV/mm)≥25
Permittivity(1.2MHz)3.0~3.3
Volume Resistivity(Ω·cm)≥1.0×1016
linear expansibility [m/(m·K)]≤2.2×10-4
Fire Resistance   UL94-V0

After Curing

Hardness(Shore  A)

60±5

Thermal conductivity [W(m·K)]

≥0.8

Dielectric Strength(KV/mm)

≥25

Permittivity(1.2MHz)

3.0~3.3

Volume Resisivity(Ω·cm)

≥1.0×1016

linear expansibility [m/(m·K)]

≤2.2×10-4

Fire Resistance   

94-V0

 

  (Pls note: the above data for this product in 25 °C temperature, 55 percent humidity conditions, for reference. The accurate data is measured by customers to when using.)


 

  Call Us Anytime With Questions About Your Application. 

More information , pls feel free to contact Ms Lydia:
Tel:  (00) 86-755-89948019

Mobile :86-18988789546

 

 

 

You Might Also Like