liquid silicone for tire manufacturing tyre mould making factory
Introduction of silicone rubber :
Two-part of liquid silicone rubber stone mouldings: flowable liquid silicon and catalyst.
liquid silicone rubber stone mouldings cures at room temperature within 4-6 hours.
Application of silicone rubber :
liquid silicone rubber stone mouldings is mainly applied for making various molds:
liquid silicone rubber stone mouldings can used to reproduce concrete or cement, gypsum, gypsum, architecture, decorative arts and crafts, big statue, cultural relic product, etc.
liquid silicone rubber stone mouldings can used to reproduce poly resin, epoxy, polyurethane-polymer, plastic toy, gift and stationery.
liquid silicone rubber stone mouldings can also used to reproduce soaps, candle & lighting.
FEATURES of silicone rubber :
liquid silicone rubber stone mouldings has an exceptional fluidity and good operability.
liquid silicone rubber stone mouldings has good Temperature and deformation resistance as well as low shrinkage.
liquid silicone rubber stone mouldings has High duplication times.
Operation step for liquid silicone rubber :
Step One to use liquid silicone rubber stone mouldings: Take 100g of part A and add 2g of part B and mix the silicon rubber and the curing agent evenly.
Step Two to use liquid silicone rubber stone mouldings: vacuum pumping
Without exception, this takes less than 10 minutes. Otherwise, it will cause cross linking reaction, and no more further steps will be available.
Step Three to use liquid silicone rubber stone mouldings: Brushing cast & Perfusion Molding operation.
silicone rubber RTV-630#:
Usage of liquid silicone rubber : Silicon rubber for PU/poly resin products, plaster, candles, gypsums crafts, cement products, concrete/architectural products, statuary, casting molds making, etc.
Model |
E-630# |
Appearance |
TRANSLUCENT |
MIXING RATIO |
1:1 |
Operating time (mins 25 0C ) |
20-40 |
Curing time(hours 25 0C) |
3-5 |
Hardness (A°) |
30±2 |
Density ( g/cm 3 ) |
1.08 |
Viscosity (Mpas -25 0C) |
15000 |
Tensile-strength(kgf /cm2 ) |
≥40 |
Tear-strength (kgf /cm ) |
≥30 |
Elongation-break(%) |
≥ 450 |
Retractility(%) |
≤0.1 |
About us :
Shen Zhen Hong Ye Jie Technology Co., Ltd. was established in 1998, is a Science and technology
corporation which is engaged in production, R & D, and marketing of silicone rubber. It set up Hong
Kong Hongye Ltd. and some other affiliated enterprises in 2005.
We are manufacturer specializing in we are leading manufacturer of rtv-2 silicone rubber in China ,
including silicon , silicone rubber ,rtv silicone rubber , liquid silicone rubber , condensation silicone rubber, silicone rubber for mold making , silicone rubber for manaul mold making ,silicone rubber for pad printing,silicone rubber for potting compound , platinum cure silicone , addition cure silicone rubber,addition silicon rubber, such as silicon for baby nipple, for cake and chocolate mold making, lifecasting, trademark, prototyping, etc. HTV solid silicone, includes spin casting, hot stamping silicon plate, general purpose molding silicon rubber, etc.
We warmly welcome all old and new customers anywhere around the world to visit our factory anytime, our aim is : Quality is the life of an enterprise. Our utmost wish is customer satisfaction. Let's join hands and strive for mutual prosperity !
More information , pls feel free to contact Ms Hebbe:
Tel: (00) 86-755-89948006
Mobile :86-18938861889