Products

RTV Silicone Rubber Mold for Stone Making Mold

China RTV Silicone Rubber Mold for Stone Making Mold, Find details about China Silicone, Silicone Rubber from RTV Silicone Rubber Mold for Stone Making Mold

Model NO.
E-6 series silicone
Sample
Available
Purity
100%
Certifications
RoHS, MSDS, SGS, ISO9001:2000
Minimum Order Quantity
200 Kilogram
Brand Name
Hong Ye Silicone Rubber
Place of Origin
Guangdong China
Application
Silicone Rubber for Mold Making
Trademark
Hong Ye silicone rubber
Transport Package
20kg/Drum, 200kg/Drum
Specification
RoHS, MSDS, SGS, ISO9001: 2000
Origin
Shenzhen, China
HS Code
39100000
Model NO.
E-6 series silicone
Sample
Available
Purity
100%
Certifications
RoHS, MSDS, SGS, ISO9001:2000
Minimum Order Quantity
200 Kilogram
Brand Name
Hong Ye Silicone Rubber
Place of Origin
Guangdong China
Application
Silicone Rubber for Mold Making
Trademark
Hong Ye silicone rubber
Transport Package
20kg/Drum, 200kg/Drum
Specification
RoHS, MSDS, SGS, ISO9001: 2000
Origin
Shenzhen, China
HS Code
39100000

    rtv silicone rubber mold for stone

Descriptions of  rtv silicone rubber mold for stone :

rtv silicone rubber is generally named two-components silicone rubber, Part A and part B. It features an exceptional fluidity and good operability.

 

Application of rtv silicone rubber mold for stone

is intended for statue mold making ,candles,plastic toys, relieve furniture,architectural decoration, funiture decorative,

sculpture, art crafts mold making and other more application.
 

RTV Silicone Rubber Mold for Stone Making Mold

Features of rtv silicone rubber mold for stone 

1. resistance to deformation and high-temperature, acid-alkali and expansion

2. good tensile strength, tear strength and elongation

3. high reproduction times
RTV Silicone Rubber Mold for Stone Making Mold

Datasheet:

Model

E-630#

Appearance

TRANSLUCENT

MIXING RATIO

1:1

Operating time (mins 25 0C )

20-40

Curing time(hours 25 0C)

3-5

Hardness (A°)

30±2

Density ( g/cm 3 )

1.08

Viscosity (Mpas -25 0C)

15000

Tensile-strength(kgf /cm2 )

≥40

Tear-strength (kgf /cm )

≥30

Elongation-break(%)

≥ 450

Retractility(%)

≤0.1

Operation instruction  :

1. Pls clear the model and tool totally before operation to prevent cure inhibition.

2.Weigh the two part correctly by electronic weight in two separate container .

3. Mixing the two part in 1:1/10:1 and stir part A and part B evenly in 2-3 minutes .

4.And get the mixture for vacuum-pumping for de-air the bubble in around 2-3

minutes . (If there is no vacuum machine, pls pour the mixture carefully and slowly

down the side of the mold frame so that less bubbles caused)

5. Enclose the product (the original model) with four plastic plates or wooden plates.

6. Clean your products and brush a layer of release agent(detergent or soap water) on

your product.

7. Pour the vacuumed mixture into the model frame from the side of the mold frame .

Package
RTV Silicone Rubber Mold for Stone Making Mold

We can provide the free sample, more details about silicone rubber, pls contact Ms Lisa at:
         
Facebook: Lisa Zhong 

 

You Might Also Like