Products

Permalloy 1j85/1j79 Soft Magnetic Alloy Wire

China Permalloy 1j85/1j79 Soft Magnetic Alloy Wire, Find details about China 1j79, Permalloy from Permalloy 1j85/1j79 Soft Magnetic Alloy Wire

Model NO.
1j79
Resistivity
0.55
Density(g/cm3)
8.6g/cm3
Elongation (≥ %)
15-25
Grade
1j79
Feature
High Initial Permeability
Ni (Min)
78.5
Trademark
Allotech
Transport Package
Carton Box
Specification
Base on customers′ request
Origin
China
HS Code
75052200
Model NO.
1j79
Resistivity
0.55
Density(g/cm3)
8.6g/cm3
Elongation (≥ %)
15-25
Grade
1j79
Feature
High Initial Permeability
Ni (Min)
78.5
Trademark
Allotech
Transport Package
Carton Box
Specification
Base on customers′ request
Origin
China
HS Code
75052200

Description                                                                                  

Permalloy 80 is an alloy of nickel, iron and molybdenum. It is a soft magnetic alloy with exceptionally high magnetic permeability. The alloy has a low coercivity, near zero magnetostriction, and significant anisotropic magnetoresistance. The low magnetostriction is critical for industrial applications,

where variable stresses in thin films would otherwise cause a ruinously large variation in magnetic properties.

Parameter                                                                                   

TABLE 1          Chemical Requirement

 Eelement C≤ P≤ S≤ Mn Si Cu≤ Mo Ni Fe
 Composition% 0.03 0.020.02 0.6-1.10.3-0.5 0.20  3.8-4.178.5-80.0Remainder 

Notes:

The shape and dimensions of the alloys are in compliance with GBn198-88

TABLE 2           Physical Requirement

PropertyResisitivity(μΩM)Desinty(g/cm3)Curie Point.CHigh saturation magneto-striction coeffientλθ/10-6
Value0.558.6450 2

TABLE 3           AC Magnetic Properties for Strip(min Value)

Thickness

        The peak for the magnetic field strength is 0.1A/m,Under different frequencise of

         flexible magnetic permeability μm/(mH/m)

60Hz400Hz1KHz10KHz
0.02  17.512.5
0.05  18.89.4
0.10 22.515 
0.20 12.57.5 
0.35258.8  

TABLE 4        Coefficient of Linear Expansion at different Temperature/(x10-6)

Temp20-100°C20-200ºC20-300ºC20-400ºC20-500ºC20-600ºC20-700ºC
Value1.3-10.810.9-11.214.4-12.911.9-12.512.3-13.212.7-13.413.1-13.6

TABLE 5        Magnetic Requirement (Cold rolling Strip)

Grade I

(δ&D)/mmμ0.08/(mHm)≥μm(mHm)≥Bs/T≥Hc(A/M)≤
0.00512.544.00.756.4
0.0117.587.50.754.8
0.02-0.0420.0112.50.754.0
0.05-0.0922.5137.50.752.8
0.10-0.1925.0162.50.752.0
0.20-0.3428.0225.00.751.6
0.35-1.0030.0250.00.751.2
1.10-2.5027.5225.00.751.6
2.50-3.0026.3187.50.752.0

Grade II

(δ&D)/mmμ0.08/(mHm)≥μm(mHm)≥Bs/T≥Hc(A/M)≤
0.02-0.0422.5125.00.752.4
0.05-0.0925.0150.00.752.0
0.10-0.1927.5187.50.751.6
0.20-0.3431.3250.00.751.2
0.3532.5275.00.750.79

Grade III

(δ&D)/mmμ0.08/(mHm)≥μm(mHm)≥Bs/T≥Hc(A/M)≤
0.0125.0150.00.732.4
0.02-0.0431.0190.00.731.6
0.05-0.0938.0250.00.731.2
0.10-0.1938.0250.00.731.2
0.20-0.3438.0280.00.731.0
0.3544.0310.00.731.0

Hot Rolling(forging) Flastspring

(δ&D)/mmμ0.08/(mHm)≥μm(mHm)≥Bs/T≥Hc(A/M)≤
3-2225.01250.752.4

Hot Rolling (Forging)Bar

(δ&D)/mmμ0.08/(mHm)≥μm(mHm)≥Bs/T≥Hc(A/M)≤
8-10025.0125.00.752.4

You Might Also Like