Products

Soft Magnetic Permalloy Precision Alloy Round Pipe 1j50

China Soft Magnetic Permalloy Precision Alloy Round Pipe 1j50, Find details about China Fe Ni Alloy, ASTM F30 from Soft Magnetic Permalloy Precision Alloy Round Pipe 1j50

Model NO.
1J50
Status
Bright
Outside
92
Inter Side
50
Length
500
Trademark
Ualloy
Transport Package
in Coil, Carton, Wooden Case
Specification
RoHS, SGS
Origin
Zhejiang, China
HS Code
722699901
Model NO.
1J50
Status
Bright
Outside
92
Inter Side
50
Length
500
Trademark
Ualloy
Transport Package
in Coil, Carton, Wooden Case
Specification
RoHS, SGS
Origin
Zhejiang, China
HS Code
722699901
Package size per unit product
51.00cm * 93.00cm * 93.00cm
Gross weight per unit product
19.000kg
1J50/FeNi 50 92x21x500mm bright pipe
 

Ualloy-1J50 (So0 magnetic alloy)

(Common Name: Ni50, E11a, 50H, Hy-Ra49, PB)

 

Ualloy-1J50 is a nickel-iron magnetic alloy, with about 50% nickel and 48% iron content. It is derived in accordance with permalloy. It has characteristics of high permeability and high saturation magnetic flux density.

Alloy melting in a vacuum medium, cast into ingots, a0er hot forging blanks made of sheet metal, and then a0er hot rolling, pickling, surface treatment, cold rolling into finished products.

Ualloy-1J85 Iron-nickel alloy( so0 magnetic alloy) mostly in an alternating magnetic field used mainly for high magnetic yoke, sensitive relays, low-loss micro-motor, small power transformers, pulse transformer, transistor switches, magnetic amplifier magnetic modulator, sensitive signal input and output transformers, magnetic heading aviation instrumentation magnetic sensor, magnetic susceptibility measurement instrument components, precision meter movable piece and the stator magnetic shielding and magnetic temperature compensation element.

 

Normal composition%

 

Ni

49.0~51.0

Fe

Bal.

Mn

0.3~0.6

Si

0.15~0.3

Mo

-

Cu

≤0.2

 

 

 

 

C

≤0.03

P

≤0.02

S

≤0.02

 

 

 

Typical Mechanical properties

 

Yield strength

Tensile Strength

Elongation

Mpa

Mpa

%

685

780

3~35

 

Typical Physical properties

 

Density (g/cm3)

8.2

Electrical resistivity at 20ºC(mm2/m)

0.45

Coefficient of linear expansion(20ºC~200ºC)X10-6/ºC

9,2

Saturation magnetostriction coefficient λθ/ 10-6

25,0

Curie point Tc/ ºC

500



The magnetic properties of alloys with high permeability in weak fields(0.4A/m)
1J50Initial permeabilityMaximum permeabilityCoercivitySaturation magnetic induction intensity
Сold-rolled strip/ sheet.
Thickness, mm		μ0.08/ (mH/m)μm/ (mH/m)Hc/ (A/m)BS/ T




≥
≥≤
0.04-0.049mm2.23025

























1.5
0.05-0.09mm2.53816
0.1-0.19mm2.94014.4
0.2-0.343.55011.2
0.35-0.5462.59.6
0.51-13.862.59.6
1.1-23.656.39.6
2.1-33.556.39.6
Bar
 
8-100 mm3.131.314.4
 
Mode of heat treatment 1J50
Annealing mediaVacuum with a residual pressure not higher than 0.1Pa, hydrogen with
a dew point of not higher than minus 40 ºC.
The heating temperature and rate1100~1150ºC
Holding time/h3~6
Cooling rateWith 100 ~ 200 ºC/ h cooled to 600 ºC, Rapid cooling to 300 baked

 

Photos:
Soft Magnetic Permalloy Precision Alloy Round Pipe 1j50Soft Magnetic Permalloy Precision Alloy Round Pipe 1j50Soft Magnetic Permalloy Precision Alloy Round Pipe 1j50Soft Magnetic Permalloy Precision Alloy Round Pipe 1j50

 

You Might Also Like