Products

Rack Mount Ethernet Lightning Arrester Poe Surge Protector 16 Channles
Rack Mount Ethernet Lightning Arrester Poe Surge Protector 16 Channles

Rack Mount Ethernet Lightning Arrester Poe Surge Protector 16 Channles

China Rack Mount Ethernet Lightning Arrester Poe Surge Protector 16 Channles, Find details about China Surge Protector, Signal SPD from Rack Mount Ethernet Lightning Arrester Poe Surge Protector 16 Channles

Model NO.
SNH-RJ45/16
Max Continuous Operating Voltage
6V
Max Discharge Current(Ka)
5ka
Nominal Discharge Current(8/20&Ms)in
2.5ka
Dimension (mm)
44×106×482mm
Adapt Transmission Rate
1000Mbps
Insertion Loss Ae
Less Than 0.5dB
Protection Line
1-8
Response Time Ta
1ns
Interface Form
RJ45
IP Code
IP20
Trademark
opplei
Transport Package
Carton or Wooden Cases
Specification
CE, FCC, ISO9001, RoHS, China National Type Test
Origin
China
HS Code
853530000
Model NO.
SNH-RJ45/16
Max Continuous Operating Voltage
6V
Max Discharge Current(Ka)
5ka
Nominal Discharge Current(8/20&Ms)in
2.5ka
Dimension (mm)
44×106×482mm
Adapt Transmission Rate
1000Mbps
Insertion Loss Ae
Less Than 0.5dB
Protection Line
1-8
Response Time Ta
1ns
Interface Form
RJ45
IP Code
IP20
Trademark
opplei
Transport Package
Carton or Wooden Cases
Specification
CE, FCC, ISO9001, RoHS, China National Type Test
Origin
China
HS Code
853530000
Cat6 Cat5e Cat5 compatible data line 1000Mbps 16 channels Gigabit Ethernet Surge Protector 
Model: SNH-RJ45/16
 
Thank you for choosing Cat6 Surge Protector SNH-RJ45/16. The model is designed to protect high-speed CAT6, CAT5, CAT5e etc communication network 16 channels from lightning over-voltage, transient over-voltage and static discharge. The protector implements multi-level protection circuit with advanced manufacturing process, and has excellent performance on discharge current, limiting voltage, response time, stability and over-all reliability.
FEATURES:
Multi. Protection circuits, Gas-Tube+ TVS technology
Dual protection in Common module and different module
TVS array technology, low capacitance
Multi-Strike Capability
 
TECHNICAL PARAMETER: 
ModelSNH-RJ45/16
Electrical Parameter
Max. continuous operating voltage Uc6V
Nominal discharge current(8/20µs)In2.5kA
Max. discharge current  (8/20µs)Imax5kA
Limiting voltage (10/700µs) Up 
Line-line25V
Line-ground500V
Adapt transmission rate1000Mbps
Insertion loss Ae0.5dB
Protection line1-8
Response time Ta1ns
Interface form16 channels RJ45
Mechanical characteristics 
Dimension44×106×482mm
Weight per unit2130g
IP CodeIP20
Working conditionsTemperature: -40 to 80ºC, Relative humidity: ≤95%
Standards ComplianceCE, FCC, RoHS,ISO9001
 
INSTALLATION AND MAINTENANCE
a)       The SPD should be connected in series between the protected device and the signal/power transmission channel.
b)      The input terminal (IN) of the SPD should connect to the signal/power transmission channel, and the output terminal (OUT) of the SPD should connect to the protected device.
c)       Connect earthing wire of the SPD to earthing bus-bar of the lightning protection system of the room or building.
No special duty needs to be carried out for maintenance. When problem arises and the SPD is suspected, check the system with SPD taken out of circuit. Should system recover, the SPD shall be regarded as a damaged unit and must be replaced immediately.


 

You Might Also Like