Products

100Mbps RJ45 Single Channel Network Surge Protector Lightning Protection
100Mbps RJ45 Single Channel Network Surge Protector Lightning Protection

100Mbps RJ45 Single Channel Network Surge Protector Lightning Protection

China 100Mbps RJ45 Single Channel Network Surge Protector Lightning Protection, Find details about China Lightning Protection, Lightning Protection Device from 100Mbps RJ45 Single Channel Network Surge Protector Lightning Protection

Model NO.
SN-RJ45
Max Continuous Operating Voltage
6V
Max Discharge Current(Ka)
5ka
Transmission Rate (Mbps)
10Mbps
Dimension (mm)
100(L) ×37(W) ×28(H)mm
Adapt Transmission Rate
100Mbps
Insertion Loss Ae
Less Than 0.5dB
Protection Line
1/2 3/6
Response Time Ta
1ns
Interface Form
RJ45
IP Code
IP20
Trademark
OPPLEI
Transport Package
Carton
Specification
CE, FCC, ISO9001, RoHS, China National Type Test
Origin
China
HS Code
853530000
Model NO.
SN-RJ45
Max Continuous Operating Voltage
6V
Max Discharge Current(Ka)
5ka
Transmission Rate (Mbps)
10Mbps
Dimension (mm)
100(L) ×37(W) ×28(H)mm
Adapt Transmission Rate
100Mbps
Insertion Loss Ae
Less Than 0.5dB
Protection Line
1/2 3/6
Response Time Ta
1ns
Interface Form
RJ45
IP Code
IP20
Trademark
OPPLEI
Transport Package
Carton
Specification
CE, FCC, ISO9001, RoHS, China National Type Test
Origin
China
HS Code
853530000
100Mbps RJ45 Single Channel Network Surge Protector Lightning protection

100Mbps RJ45 Single Channel Network Surge Protector Lightning Protection
100Mbps RJ45 Single Channel Network Surge Protector Lightning Protection
Model: SN-RJ45

 
Thank you for choosing Cat5 Surge Protector SN-RJ45. The model is designed to protect high-speed communication network from lightning over-voltage, transient over-voltage and static discharge. The protector implements multi-level protection circuit with advanced manufacturing process, and has excellent performance on discharge current, limiting voltage, response time, stability and over-all reliability.
FEATURES:
Multi. Protection circuits, Gas-Tube+ TVS technology
Dual protection in Common module and different module
TVS array technology, low capacitance
Multi-Strike Capability
 
TECHNICAL PARAMETER: 
ModelSN-RJ45
Electrical Parameter
Max. continuous operating voltage Uc6V
Nominal discharge current(8/20µs)In2.5kA
Max. discharge current  (8/20µs)Imax5kA
Limiting voltage (10/700µs) Up 
Line-line25V
Line-ground500V
Adapt transmission rate100Mbps
Insertion loss Ae0.5dB
Protection line1/2 3/6
Response time Ta1ns
Interface formRJ45
Mechanical characteristics 
Dimension100(L) ×37(W) ×28(H)mm
Weight per unit100g
IP CodeIP20
Working conditionsTemperature: -40 to 80ºC, Relative humidity: ≤95%
Standards ComplianceCE, FCC, RoHS,ISO9001
 
INSTALLATION AND MAINTENANCE
a)       The SPD should be connected in series between the protected device and the signal/power transmission channel.
b)      The input terminal (IN) of the SPD should connect to the signal/power transmission channel, and the output terminal (OUT) of the SPD should connect to the protected device.
c)       Connect earthing wire of the SPD to earthing bus-bar of the lightning protection system of the room or building.
No special duty needs to be carried out for maintenance. When problem arises and the SPD is suspected, check the system with SPD taken out of circuit. Should system recover, the SPD shall be regarded as a damaged unit and must be replaced immediately.

100Mbps RJ45 Single Channel Network Surge Protector Lightning Protection
 100Mbps RJ45 Single Channel Network Surge Protector Lightning Protection

You Might Also Like