LYWX-Series new style Wire Feeding Machine

Brief introduction:

Wire feeding machine is a kind of new equipment for nodular graphite casting,The Cored wire will enter to the bottom of the hot metal ladle continuously with the help of this kind of equipment, The spheroidizing process will be happen after the contact between alloy cored wire and molten iron to achieve the purpose of desulfurization, spheroidizing, inoculation and the effect of the composition adjustment

Wire feed machine features:

The wire feed machine for desulfurization, spheroidization and inoculation can eliminate the influence of artificial factors then keep the residua magnesium content fluctuation range of hot metal small to make the product quality isstable, the operation is simple, save time and effort; Gas and arc on the operation will be on good management and control to reduce or eliminate spheroidizing operations on the environment pollution and so on.

Product advantages:

compared with the existing wire feed machine, this new type of wire feed machine has the following advantages:

1) Small floor space not only applies to the original factory technical renovation but also applicable for new production technology design.

2) Dust collection effect is good, and the dust collecting the required air volume is small so the energy-saving effect also is good.

3) Installation of flexible and small investment, We may adjust the installation according to the customer site and the circumstances.

4)The machine with Counting precision, compact structure, small internal resistance, large driving force, not skid and thread jamming.

5) The company provided wire feed machine design scheme and drawing free , There also support the professional and technical personnel to make the design on the siet.

6) multiple wire feed machine can be placed together with unified control to realize the line feed at the same time.

7)Three years warranty, life-long maintenance and  free to provide one-stop service.

Daily maintenance:

1)50.The wire feeding machine should be installed in the environment temperature is lower than 50 degrees Celsius.

2)should often keep feeding line case surface and internal dry and clean, especially often with anhydrous compressed air blow chassis and distribution cabinets and control instrument internal dust;

3)Don't press the power switch control instrument if not Essential.

4)Shall maintain periodically of sensor each week, Get rid of the dust adsorption on counting magnetic an sensor;

5)We should turn off all the power after work. Be careful not to make the electric equipment on often to improve equipment safety and the service life of electrical appliances (especially converter)

6)Should check the following part before the succession,
Shall not loose wire feeding wheel up and down
B,.should be examined by distributor is presented, the operation is reliable.

7,Lubricant adding should be in accordance with the provisions of the following parts:
A,Drive chain lubricating once A week, A manual of worm gear, connecting rod shaft and the pressure drop of oil once per shift;
B,.The lubrication of transverse axis which was connected with Conduit and frame would be once a week.

Available model as follows:

1)LYWX- single(double)feeding machine ,LYWX- single(double)feeding machine,LYWX-1 Single Automatic feeding machine,LYWX-2 double Intelligent

control feeding machine. Etc.

 
Sigle Automatic Wire Feeder Machine Performance Of LYWX-1  
 
The photo of Cored Wire Feeder Machine/wire feeder station for reference only as below: