CAT6 Data Line Indoor Switch Protection Surge Protector
China CAT6 Data Line Indoor Switch Protection Surge Protector, Find details about China Surge Protector, Lightning Protector from CAT6 Data Line Indoor Switch Protection Surge Protector
Basic Info.
Model NO.
SNH-RJ45
Max Continuous Operating Voltage
6V
Max Discharge Current(Ka)
5ka
Transmission Rate (Mbps)
100Mbps
Dimension (mm)
100(L) ×87(W) ×28(H)mm
IP Code
IP20
Weight Per Unit
120g
Insertion Loss Ae
0.5dB
Protection Line
1-8
Response Time Ta
1ns
Interface Form
Interface Form
Trademark
OPPLEI
Transport Package
Carton
Specification
CE, FCC, ISO9001, RoHS, China National Type Test
Origin
China
HS Code
8535300000
Model NO.
SNH-RJ45
Max Continuous Operating Voltage
6V
Max Discharge Current(Ka)
5ka
Transmission Rate (Mbps)
100Mbps
Dimension (mm)
100(L) ×87(W) ×28(H)mm
IP Code
IP20
Weight Per Unit
120g
Insertion Loss Ae
0.5dB
Protection Line
1-8
Response Time Ta
1ns
Interface Form
Interface Form
Trademark
OPPLEI
Transport Package
Carton
Specification
CE, FCC, ISO9001, RoHS, China National Type Test
Origin
China
HS Code
8535300000
Product Desciption
Cat6 Data Line Indoor Switch Protection Surge Protector
Model: SNH-RJ45
INSTALLATION AND MAINTENANCE
a) The SPD should be connected in series between the protected device and the signal/power transmission channel.
b) The input terminal (IN) of the SPD should connect to the signal/power transmission channel, and the output terminal (OUT) of the SPD should connect to the protected device.
c) Connect earthing wire of the SPD to earthing bus-bar of the lightning protection system of the room or building.
No special duty needs to be carried out for maintenance. When problem arises and the SPD is suspected, check the system with SPD taken out of circuit. Should system recover, the SPD shall be regarded as a damaged unit and must be replaced immediately.
6. FQA:
Q: Can I get some samples?
A: Yes, Sample orders welcomed.
Q: Can I use my own Logo or design on goods?
A: Yes, OEM Support. Customized logo and design on mass production are available.
Q:What is the delivery time?
A: 3 days for samples, 7-10 working days for mass production after payment.
Q: Can you give me a discount?
A: Yes. Big purchase. Large discount.
Q: What is the payment term?
A: T/T, L/C at sight, West union , Paypal, etc
Q: Can I trust you?
A: Absolutely YES, We are "Made In China" verified supplier for many years.
Q: How is the After-Sale Service?
A: We assure 5 years warranty, 3 years replacement, any question we have technical department to help you.
Q: May I visit your factory?
A:Sure, welcome any time. We can also pick you up at airport or station.
7.Contact information:
Lyric Ran
International Regional Manager
Mob: +86 17630058769
Model: SNH-RJ45
| Thank you for choosing Cat6 Surge Protector SNH-RJ45. The model is designed to protect high-speed communication network from lightning over-voltage, transient over-voltage and static discharge. The protector implements multi-level protection circuit with advanced manufacturing process, and has excellent performance on discharge current, limiting voltage, response time, stability and over-all reliability. | |
| FEATURES: Multi. Protection circuits, Gas-Tube+ TVS technology Dual protection in Common module and different module TVS array technology, low capacitance Multi-Strike Capability | |
| TECHNICAL PARAMETER: | |
| Model | SNH-RJ45 |
| Electrical Parameter | |
| Max. continuous operating voltage Uc | 6V |
| Nominal discharge current(8/20µs)In | 2.5kA |
| Max. discharge current (8/20µs)Imax | 5kA |
| Limiting voltage (10/700µs) Up | |
| Line-line | 25V |
| Line-ground | 500V |
| Adapt transmission rate | 1000Mbps |
| Insertion loss Ae | 0.5dB |
| Protection line | 1-8 |
| Response time Ta | 1ns |
| Interface form | RJ45 |
| Mechanical characteristics | |
| Dimension | 100(L) ×87(W) ×28(H)mm |
| Weight per unit | 120g |
| IP Code | IP20 |
| Working conditions | Temperature: -40 to 80ºC, Relative humidity: ≤95% |
| Standards Compliance | CE, FCC, RoHS,ISO9001 |
INSTALLATION AND MAINTENANCE
a) The SPD should be connected in series between the protected device and the signal/power transmission channel.
b) The input terminal (IN) of the SPD should connect to the signal/power transmission channel, and the output terminal (OUT) of the SPD should connect to the protected device.
c) Connect earthing wire of the SPD to earthing bus-bar of the lightning protection system of the room or building.
No special duty needs to be carried out for maintenance. When problem arises and the SPD is suspected, check the system with SPD taken out of circuit. Should system recover, the SPD shall be regarded as a damaged unit and must be replaced immediately.
6. FQA:
Q: Can I get some samples?
A: Yes, Sample orders welcomed.
Q: Can I use my own Logo or design on goods?
A: Yes, OEM Support. Customized logo and design on mass production are available.
Q:What is the delivery time?
A: 3 days for samples, 7-10 working days for mass production after payment.
Q: Can you give me a discount?
A: Yes. Big purchase. Large discount.
Q: What is the payment term?
A: T/T, L/C at sight, West union , Paypal, etc
Q: Can I trust you?
A: Absolutely YES, We are "Made In China" verified supplier for many years.
Q: How is the After-Sale Service?
A: We assure 5 years warranty, 3 years replacement, any question we have technical department to help you.
Q: May I visit your factory?
A:Sure, welcome any time. We can also pick you up at airport or station.
7.Contact information:
Lyric Ran
International Regional Manager
Mob: +86 17630058769
You Might Also Like
Triac 0-10V Dali Dimmable Recessed LED Downlight/ COB LED Ce......
GMP Factory Supply Food Grade Phycocyanin Spirulina Extract
Table Tennis Racket with Rubber + Bag Ping Pong Bat
3mh Cool Giant Fat Inflatable Cat Cartoon for Advertising
Mslfp14 17*17 Wired Box Size X-ray Digital Flat Panel Detect......
Portable Glass Shape Edge Polishing Machine
A4 A3 Paper Wrapping Machine
Stainless Steel Angle Tube Strainer
Sinchold 9220/20/45 Forged Steel Welded Crane Rail Clips
Warehouse Tent Made by Superb Tent
Thyristor Rectified CO2 MIG Mag Arc Welding Machine