Introduction

Inconel 600 is a Nickel-Chromium alloy with good resistance to oxidation and corrosion at high temperatures.

Chemical Composition of Inconel 600

The compositional range for Inconel 600 is provided in the table below.

Typical Properties of Inconel 600

Typical properties of Inconel 600 are covered in the following table.

Properties of Supplied Materials and Heat Treated Materials

Note - In both cases slight magnetism may occur below -120°C (-184°F)

Relevant Standards

Inconel 600 is covered by the following standards:

•         BS 3075 and BS 3076 NA 14

•         AMS 5687

•         ASTM B166

Equivalent Materials

Inconel 600 is the tradename of Special Metals Group of Companies and equivalent to:

•         W.NR 2.4816

•         UNS N06600

•         AWS 010

Applications of Inconel 600

Inconel 600 typically finds application in:

•         Furnace components

•         Chemical processing

•         Food processing and

•         Nuclear engineering.

Form

Specification

Supply Form

Others

Sheet

Thickness:0.40-4.75mm,General Width:1000,1219,1500mm

Whole Coil or piece of it

Cold Annealed,Surface 2B,2E

Plate

Thickness:4.76-60mm,Width:1500,2000,2500mm,Length:3000,6000,8000,8500mm(Under 10mm plate can be coiled)

Whole Coil or piece of it

Single hot rolling,Solid solution annealed state,Surface 1D

Belt

Thickness:0.10-3.0mm,Width:50-500mm

Whole Coil or Specified size

Cold Annealed,Surface 2B,2E

Bar & Rod

Rolled barΦ5-45mm,Length≤1500mm

Polished Bar(circle,Square)

Solution annealing,descaling

Forged barΦ26-245mm,Length≤4000mm

Weld tube

Outer diameterΦ4.76-135mm,Wall Thickness0.25-4.00mm,Length:≤35000 mm

Base on your requirement

Use for PHE

Seamless Tube

Outer diameterΦ3-114mm,Wall Thickness0.2-4.5mm

Base on your requirement

Use for PHE

Wire

Outer diameterΦ0.1-13mm

Base on your requirement

Ni & Ni alloy, Ti & Ti alloy

Forged piece

roundness and square alloy

Base on your requirement

Steel, Alloy

Flangs

All kinds of Flangs

Base on your requirement

Steel, Alloy

Welding Material

Coil wire Φ0.90mm/1.2mm/1.6mm

Base on your requirement

Certificate of Origin:America, Sweden, Britain, Germany, Austria, Italy, France.

Straight WireΦ1.2mm/1.6mm/2.4mm/3.2mm/4.0mm

Welding rodΦ2.4mm/3.2mm/4.0mm

Tube

Elbow, three links, four links, different diameter size

Base on your requirement

Ni & Ni alloy, Ti & Ti alloy

Explosive bonded laminate

Raw Sheet Thickness≥2mm

Base on your requirement

Ni & Ni alloy, Ti & Ti alloy