Products

Fullwell Dual Band 4 Ports 10/100/1000Mbps

China Fullwell Dual Band 4 Ports 10/100/1000Mbps, Find details about China ONU, Optical Node from Fullwell Dual Band 4 Ports 10/100/1000Mbps

Model NO.
FWG-HGU824GWC
ONU Transmit
1.5~5dBm(Gpon)
Bandwidth/Flatness
47~1000/≤ ±1
Output Level
82±1(-5~-15dBm)
Power Consumption
≤12W
Trademark
Fullwell (can customised)
Transport Package
590*590*170mm by Strong Carton Based on 1PCS
Specification
CE, ROHS
Origin
Zhejiang Hangzhou
HS Code
8517622990
Model NO.
FWG-HGU824GWC
ONU Transmit
1.5~5dBm(Gpon)
Bandwidth/Flatness
47~1000/≤ ±1
Output Level
82±1(-5~-15dBm)
Power Consumption
≤12W
Trademark
Fullwell (can customised)
Transport Package
590*590*170mm by Strong Carton Based on 1PCS
Specification
CE, ROHS
Origin
Zhejiang Hangzhou
HS Code
8517622990
Product Description
    FWG-HGU824GWC is xPON(GPON and EPON dual-mode)HGU ONT. It is designed for meeting the multi-services needs of fixed network operators or cable operators, and widely used in FTTO (office), FTTD (desk), FTTH (home) broadband access and CATV, video surveillance, and other requirements.   
It is based on mature GPON and Gigabit EPON technology, which has a high ratio of performance to price, stable, cost-effective, high reliability, easy management, configuration flexibility, good quality of service (QOS) guarantees, and the technology of 802.11b/g/n/ac WIFI(2T2R), Layer 2/3. It is fully compliant with GPON and EPON technical regulations such as  ITU-T G.984.x, IEEE802.3ah.Small size dual-mode ONU can automatically detect OLT and switch PON mode, it can be used as GPON or EPON. It can also be applied to a wide temperature environment, and also has a firewall function.     
  
 Features:
Ø HGU ONT, bridging and routing modes can be set
Ø Dual-mode ONT compatible with popular EPON and GPON OLT.
Ø Support loop detection, IGMP, IGMP snooping, and MLD snooping
Ø 802.1Q VLAN, QinQ, Cos, DSCP, QoS for priority of service
Ø Support port speed, support for storm suppression
Ø WiFi support 2.4G speeds up to 300Mbps and 5G speed up to 867Mbps

Ø Support VOIP protocol: SIP, H323
Ø Support No-auth, WEP, WPA-PSK, and WPA2-PSK.
Ø CATV(RF bandwidth:45~1000MHz,),AGC Dynamic Range(dBm):-12~-2, output level:80±2dBuV.
Ø CATV function can be managed, supporting remote control of CATV signal by OLT
Ø Support Telnet, CLI, OMCI/OAM and Web management
Ø Support NAPT, Firewall function
Ø Support remote software upgrade
Fullwell Dual Band 4 Ports 10/100/1000Mbps
 Technical parameters
ItemsUnitSpecifications
PON standard. EPON IEEE802.3ah, GPON ITU-T G.984.x,G.988
Optical interface SC/APC connector,1 GPON/EPON interface(EPON PX20+ and GPON Class B+)Receiving sensitivity: ≤-28dBm,Transmitting optical power: 1~+4dBmTransmission distance: 20KM
SpeedGbpsGPON: uplink 1.25Gbps, downlink 2.5Gbps; EPON: symmetric 1.25Gbps
WavelengthnmTx1310, Rx 1490, CATV 1550
InterfaceData4GE 10/100/1000Mbps
Auto adaptive Ethernet interfaces, Full/Half Duplex, RJ45 connectors
telephone2 FXS, RJ11 connectors
WirelessCompliant with IEEE802.11b/g/n/ac, 300Mbps/867Mbps,2T2R 2 external antenna
IndicatorLEDPWR, PON, LOS, LAN1--LAN4, 2.4G, 5G, TV
Operating conditionºCOperating temp: -5 ~ +55
Storing conditionºCStoring temp: -30 ~ +60
Humidity%10~90(non-condensing)
Power supplyVDC 12V,1.5A adapter
Power consumptionW≤10
Dimensionmm251*190*31(L×W×H)
Net weightKg0.28

CATV
ItemsUnitSpecifications
Input optical power rangedBm-18~ +2 
Optical return lossdB≥55
Wavelengthnm1550 ±10
RF Output ConnectorFImperial or metric
RF management Support OMCI On & Off CATV signal
RF BandwidthMHz/dB47~1000/±1
RF impedanceΩ75
RF output return lossdB≥14 dB
RF output leverdBuV80±2(@-12 to -2dBm)
AGC RangedBm-12~-2
CTB/CSO/HUMdB≥62 ≥62 ≥45
MERdB≥32 @-15dBm, ≥34 @-12dBm

Instructions for Use

Power Connection
This machine is supported by a power adapter. Firstly, connect the DC 12V output cable of the power adapter to the DC 12V port of the machine, and then plug the external regulated power supply into the 220V of the mains. The power indicator on the panel is on, indicating that the power supply is working normally.

2 INTERFACES
INTERFACESIntroduction
ON/OFFPower switch button
PowerPower input interface, DC 12V/1.5A
Optical CATV and xPON fiber interfaces, using SC/APC fiber access
LAN1-LAN4LAN service interface
ResetReset button
CATVCATV RF signal output
  1. Indicators Description
IndicatorStatusDescription
PowerONThe device is powered on normally.
OFFThe device is not powered on.
PONTwinklingReceived light, device not registered
ONThe ONU is connected to the OLT and registered successfully.
OFFNo optical received, device not registered
LOSTwinklingFiber break or optical power exceeds the limit
OFFONU accepts normal optical power
LAN1-LAN4ONThe network port is connected but no data is transmitted.
TwinklingThe network port has a data transmission
OFFThe device is not powered on or the network port is not connected to the terminal device.
WIFI(2.4G/5G)ONWIFI works fine
TwinklingWIFI has a data transmission
OFFWIFI works abnormally
InternetONSuccessfully connected to the Internet
OFFNot connected to the Internet
OPTONCATV optical signal is within the normal range
OFFCATV optical signal is too low or faulty
TVONRF output level is within the normal range
OFFRF output level is not within the normal range

 WEB Login
This machine supports WEB management. You can log in to 192.168.0.1 (default IP address) from any PC to get relevant information. The steps are as follows:
1) Change the network segment of the PC to 192.168.0.X and connect it to any network port of the machine with a network cable;
2) Enter http://192.168.0.1 in Chrome, press Enter to pop up the login page, enter the username and password (admin/system), and then enter the system management page.

Matters Needing Attention
1) This device is an indoor structure, it can not be used in places that are easily invaded by rainwater; it should have proper space in the indoor box to facilitate heat dissipation;
2) The fiber input and the cable output must be reserved for a certain length to avoid accidents caused by too short; the optical interface in the ONU is the SC/APC head. Do not misplace or the end faces are inconsistent.

 Accessories
1). External power supply * 1: AC110~C255V→DC12V/1.5A
2). User Guide * 1
3). The certificate of conformity has been affixed to this manual.

 




 
 

You Might Also Like