Molybdenum lanthanum titanium alloy ground TZM rods dia48mm
TZM is a particle-strengthened molybdenum based alloy containing titanium, zirconium and carbon.
The chemical Composition is:
 TZM: Mo + 0.40-0.55%Ti + 0.06-0.12%Zr + 0.01-0.04% C
 Mo_La:Generally: La2O3:0.4%-0.7%
 Size: According to customer's requirements
TZM is available in sheet and rod form in basically the same size range as moly with the exception of thin foil. Rembar is experienced in the fabrication of TZM. Refer to the separate TZM sheet.

TZM Alloy properties:
1)TZM is widely used in the aerospace, aviation and other industries. It could be used as nozzle material, valve body, gas piping materials, tubes in the gate material, die casting molds, extrusion dies and high temperature furnace heating element and heat shield etc.
2)Used for seamless stainless tubes of stainless,aloy steel and high temperature alloy.
3)Molybdenum lanthanum alloy can work at higher temperatures.

Thermal and Electrical Properties of TZM Alloy (Ti0.5/Zr0.1)
 
Advantages of TZM compared compared to pure molybdenum: 
1)Above 1100 centigrade tensile strength is about twice that of unalloyed molybdenum
2)Better creep resistance
3)Higher recrystallization temperature
4)Better welding properties

We also have other molybdemum alloy products:
1)Moly30% Tungsten70% alloy(MoW alloy)
This is another moly alloy that offers unique properties. It was developed for the zinc industry. This alloy resists the corrosive effects of molten zinc. Mo/30W has also proved effective in rocket nozzles and has the potential of offering enhanced performance in applications where any erosive effects are a factor.

2) Moly50% Rhenium 50% alloy
This alloy offers the strength of moly with the ductility and weldability of rhenium. It is a costly alloy and it is only available in a very limited size range. It offers significant advantages in thin foil applications for high temperature delicate parts, especially those that must be welded. Note that, although this alloy is nominally 47% rhenium, it is customarily referred to 50/50 moly/rhenium. Other moly/rhenium alloys include moly/rhenium sheet with 47.5% and 41% rhenium. The moly/41%Re alloy does not develop sigma phase. This makes the material even more ductile after exposure to high temperatures.

3)Molybdenum copper alloy forged rods Molybdenum contents 50%-85%

Mo-Cu composites has lower density, its thermal expansion coefficient and thermal conductivity can be adjusted to match many different materials.

MoCu alloy physical Properties of Major Products
Features of Molybdenum copper alloy:
1)Large sized sheets available ( we can supply as the customers' need)
2)More easily to be stamped into components than CMC
3)Very strong interface bonding which can repeatedly resist 850ºC heat shock
4)Higher thermal conductivity and lower cost 

Momolybdenum copper alloy physical properties
Molybdenum copper alloy application:
molybdenum copper used in spaceflight fields.
Molybdenum copper alloy has more excellent performances, so can be used as high temperature part of rockets and missiles. This alloy has high thermal conductivity, thermal expansion, high melting point, and the good mechanical ability, all of these reasons, which make the molybdenum copper can be used in the spaceflight fields.

More rods information from Luoyang Huapei Tungsten&Molybdenum Material Co.LTD

Molybdenum rods description
1)Purity: ≥99.95%
2)Forged density:>10.2g/cm3   
3)Sintered density:about 9.7g/cm3
4)Surface:black,ground,polished
5)Size: diameter2-120mm Length<2500mm0.
6)Straightened rods after drawn  diameter0.8mm-3.2mm
7) Price: USD34-USD55/kg
8) Delivery time:7-15 days
9) Transportation: By Express,by air&by sea

Surface finished
Black - Surface is "as swaged or "as drawn"; Retaining a coating of processing lubricants and oxides.
Cleaned - Surface is chemically cleaned to remove all lubricants and oxides.
Ground - Surface is centerless ground to remove all coating and to achieve precise diameter control  

Molybdenum rods tolerance
molybdenum rods application:
1)Used in glass,glass fiber,and glass kiln industry,it can serve a long time in metaled glass
   Liquid at 1300 centigrade