DC12V/24V Remote Control Switch for Automation Control Kl-K803

China DC12V/24V Remote Control Switch for Automation Control Kl-K803, Find details about China Remote Control Switch, Remote Controller from DC12V/24V Remote Control Switch for Automation Control Kl-K803

Model NO.
KL-K803
Model Number
Kl-K803
Channel
8
Operating Voltage
DC12V (Customized 9V, 24V)
Operating Frequency
315/433.92MHz / Customized
Receiver Sensitivity
-103dBm
Encoding Type
Learning Code 1527
Work Mode
Momentary, Toggle
Output Way
Switching on/off
Dimension
95*75*30mm
Maximum Current
5A
Trademark
KELVIN
Transport Package
Carton
Specification
95*75*30mm
Origin
Shenzhen, China
HS Code
8526920000
Model NO.
KL-K803
Model Number
Kl-K803
Channel
8
Operating Voltage
DC12V (Customized 9V, 24V)
Operating Frequency
315/433.92MHz / Customized
Receiver Sensitivity
-103dBm
Encoding Type
Learning Code 1527
Work Mode
Momentary, Toggle
Output Way
Switching on/off
Dimension
95*75*30mm
Maximum Current
5A
Trademark
KELVIN
Transport Package
Carton
Specification
95*75*30mm
Origin
Shenzhen, China
HS Code
8526920000

DC12V/24V Remote Control Switch for Automation Control KL-K803
KL-K803 is a 8-Channle learning code remote controller, it works at DC12V, and output switching ON/OFF via 8 channels, each channel has 3 terminals which are NO, NC and COM. 

Operation Method:

1. Match code: 
Hold learning button and learning indicator light blinks, then press a buttons of remote control, if indicator lights flashes 3 times, match code successfully. Maximum 20 remote controls can be matched.

2. Delete code:
Hold learning button till the indicator LED lights and then off, delete successfully.

3. Set working mode:
S1 & S2 program the sequence as follows:
Jumper on S1→ Toggle
Jumper on S2→ Latching
No Jumper on S1 &S2→ Momentary

DC12V/24V Remote Control Switch for Automation Control Kl-K803
But 8/12/15 channels not Latching function. 

Tech Data:

DC 12V 4-Channel Remote Control Switch KL-K400C

InputDC 12V (DC9V, 24V can be customized)
Channels8
Working Current8mA
Working Frequency433MHz / 315MHz, Optional
Receiving Sensitivity-103dBm
Decoding TypeLeaning Code(EV1527) / Fixed Code(PT2262)
Working ModeMomentary /  Latching
OutputSwitching Signal (Dry Contact)
Max Load5A (Relay Contact)
Dimension95*75*30mm

DC12V/24V Remote Control Switch for Automation Control Kl-K803

Working Mode:

1. Momentary: Press remote button A, the corresponding relay on the receiver is on; release button A, the relay is off, the same as others.

2. Toggle: Press remote button A, the corresponding relay on the receiver is on; press button A again, the relay is off, the same as others.

3. Latching: Press remote button A, the relay A is on, B is off; press button B, the replay B is on, A is off.

Wiring Way & Diagram:

B=Normally Closed, K=Normally Open, G=Common.

Please refer to below picture as wiring diagram:


DC12V/24V Remote Control Switch for Automation Control Kl-K803

 

Shipping

1) Express: DHL, FedEx, UPS, TNT, EMS, etc.

2) By air

3) By sea

4) By special line

Depends on buyer's requirement. 
DC12V/24V Remote Control Switch for Automation Control Kl-K803

DC12V/24V Remote Control Switch for Automation Control Kl-K803
DC12V/24V Remote Control Switch for Automation Control Kl-K803

 http://szklvn.en.made-in-china.com/