China Remote Controller Remote Switch Kl-K803, Find details about China Remote Control Switch, Remote Controller from Remote Controller Remote Switch Kl-K803
Remote Controller Remote Switch KL-K803
KL-K803 is a 8-Channle learning code remote controller, it works at DC12V, and output switching ON/OFF via 8 channels, each channel has 3 terminals which are NO, NC and COM.
Operation Method:
1. Match code:
Hold learning button and learning indicator light blinks, then press a buttons of remote control, if indicator lights flashes 3 times, match code successfully. Maximum 20 remote controls can be matched.
2. Delete code:
Hold learning button till the indicator LED lights and then off, delete successfully.
3. Set working mode:
S1 & S2 program the sequence as follows:
Jumper on S1→ Toggle
Jumper on S2→ Latching
No Jumper on S1 &S2→ Momentary
But 8/12/15 channels not Latching function.
Tech Data:
DC 12V 4-Channel Remote Control Switch KL-K400C
Input | DC 12V (DC9V, 24V can be customized) |
Channels | 8 |
Working Current | 8mA |
Working Frequency | 433MHz / 315MHz, Optional |
Receiving Sensitivity | -103dBm |
Decoding Type | Leaning Code(EV1527) / Fixed Code(PT2262) |
Working Mode | Momentary / Latching |
Output | Switching Signal (Dry Contact) |
Max Load | 5A (Relay Contact) |
Dimension | 95*75*30mm |
Working Mode:
1. Momentary: Press remote button A, the corresponding relay on the receiver is on; release button A, the relay is off, the same as others.
2. Toggle: Press remote button A, the corresponding relay on the receiver is on; press button A again, the relay is off, the same as others.
3. Latching: Press remote button A, the relay A is on, B is off; press button B, the replay B is on, A is off.
Wiring Way & Diagram:
B=Normally Closed, K=Normally Open, G=Common.
Please refer to below picture as wiring diagram:
Shipping
1) Express: DHL, FedEx, UPS, TNT, EMS, etc.
2) By air
3) By sea
4) By special line
Depends on buyer's requirement.
http://szklvn.en.made-in-china.com/