Metal Working CNC Milling Machine Vertical Machining Center Vmc1060

China Metal Working CNC Milling Machine Vertical Machining Center Vmc1060, Find details about China Vertical Machining Center, Machining Center from Metal Working CNC Milling Machine Vertical Machining Center Vmc1060

Basic Info.

Model NO.

VMC1060

Performance Classification

Economical CNC Machine Tools

Condition

New

Transport Package

Wooden

Specification

3650*2750*2850

Origin

China

HS Code

8501109190

Model NO.

VMC1060

Performance Classification

Economical CNC Machine Tools

Condition

New

Transport Package

Wooden

Specification

3650*2750*2850

Origin

China

HS Code

8501109190

Product Desciption

Structural performance of machine tool
1. Fuselage design
The fuselage and saddle are reinforced by mountain shaped ribs, with the shortest force streamline, ensuring the best rigidity of the fuselage.
Based on the excellent engineering design, the stiffeners of the base and column of the machining center can resist the torsion and damping, and transfer the cutting vibration to non
Cutting area. The column is designed with torque tube, which can provide excellent rigidity, bending and torsion resistance Ultra wide base design,
At the same time, lower the center of gravity of the base and adjust the center of gravity of the machine tool to the best stable height. The span at the bottom of the column is widened to improve the stability of the machine tool.
2. spindle head
The contact length ratio between the main shaft and the column is appropriate to provide stable support for the main shaft. Independent cooling system is built in the spindle head to stabilize the spindle continuously
The head heat is in a reasonable range, which reduces the thermal extension of the spindle and ensures the machining accuracy.

3. counterweight
In response to the processing requirements of different models, the following counterweight methods are adopted:
Counterweight: low failure rate and long service life;
Nitrogen counterweight: rapid action, no noise, greatly improved processing accuracy, increased machine life;
No counterweight: in order to meet the requirements of high speed and high sensitivity processing, the machine tool adopts the method of no counterweight, and enhances the requirements of servo motor and screw,
Z-axis with brake, to ensure the accuracy of the machine tool is stable and lasting, and increase the service life.
4. screw rod
It adopts imported grinding level pre drawn double nut screw rod to eliminate reverse clearance. After heat treatment, it has high rigidity, wear resistance, torsion resistance and long service life, which guarantees high machining accuracy of the machine.
5. AC servo motor
Adopt original imported from Japan, super high performance servo motor, provide stronger power when heavy cutting.
In the case of low feed, high torque can still be maintained.
Higher than 10000 (pixel) resolution and closed-loop position feedback ensure high accuracy.
High quality coupling ensures that the screw rod moves with the axis of the motor.
6. Lubrication system
The whole machine adopts a positive displacement lubrication system and a de pressurized oil pump, with stable pressure and flow, which effectively transports the oil to each lubrication point and provides uniform forced lubrication for each slide surface, so as to ensure the accuracy and service life of the machine tool.
7.Chip remover system
Metal Working CNC Milling Machine Vertical Machining Center Vmc1060

Technical parameters
Model	LK-650B/C	LK-850B/C	LK-1060B/C	LK-1160V	LK-1370	LK-1580	LK-1690	LK-1890	LK-2015	LK-3025	LK-4025	LK-5025
X-axis Travel mm	600	800	1100	1100	1300	1500	1500	1800	2000	3000	4000	5000
Y-axis Travel mm	500	500	600	600	700	800	800	900	1500	2500	2500	2500
Z-axis Travel mm	500	500	600	600	650	700	700	380	750	1000	1000	1000
Spindle end to table mm	110-610	110-610	70-670	70-670	120-770	/	/	16-840	170-920	260-1260	150-1150	260*1260
Spindle speed rpm	10000	10000	10000	12000	8000	12000	8000	6000	4000/6000	4000/6000	4000/6000	4000/6000
Spindle motor power kw	7.5	7.5	11	11	11-15	15	15	22	25	25	25	25
Three axis motor power kw	X2/Y2/Z2	X2/Y2/Z2	X3/Y3/Z3	X3/Y3/Z3	X3/Y3/Z3	X4.5/Y4.5/Z4.5	X4.5/Y4.5/Z4.5	X7/Y7/Z7	X7/Y4.5/Z4.5	X7/Y4.5/Z4.5	X7/Y4.5/Z4.5	X7/Y4.5/Z4.5
Table area mm	500*800	500*1000	600*1300	600*1300	700*1400	1700*800	1700*800	900*2000	1200*2100	2300*3000	2200*4600	2300*5000
T-groove (groove * width * center distance) mm	3-18*144	5-18*90	5-18*100	3-18-150	18T1105	5-22x1400	5-22x1400	5-22*165	7-22*150	11-28*200	11-28*200	11-28*200
X-axis rapid displacement mm/min	24000/36000	24000/36000	24000/36000	36000	30000	16000	16000	15000	12000	10000	10000	10000
Y-axis rapid displacement mm/min	24000/36000	24000/36000	24000/36000	36000	30000	16000	16000	15000	12000	10000	10000	10000
Z-axis rapid displacement	18000/36000	18000/36000	18000/36000	36000	30000	16000	16000	12000	12000	10000	10000	10000
feed rate mm/min	1-8000	1-8000	1-6000	12000	12000	12000	12000	1-5000	1-5000	1-5000	1-5000	1-5000
Spindle taper	BT40	BT40	BT40	BT40	BT40	BT40	BT50	BT50	BT50	BT50	BT50	BT50
Prop quantity	24	24	24	24	24	24	24	32	40	50	60	80
Maximum tool diameter mm	80	100	100	150	150	150	150	240	240	300	300	300
Maximum tool length mm	200	260	305	305	305	305	305	305	305	315	315	315
Tool weight kg	7	7	7	7	10	10	10	15	150	20	25	25
Tool magazine category	Bamboo hat / knife arm	Bamboo hat / knife arm	Bamboo hat / knife arm	Disc type	Disc type	Disc type	Disc type	Bamboo hat / knife arm	Disc type	Disc type	Disc type	Disc type
Air pressure source kg/cm²	5.5	6	6	6	6	6	6	9	8	10	10	10
Bearing of worktable kg	600	800	1000	800	800	800	800	2300	3500	4500	5500	6500
Machine tool weight kg	5500	6000	8000	7000	9000	10000	12000	15500	26000	42000	46000	53000