RB-25 reinforced bar bending function through angle setting switch prediction and precise bending angle, from 0-180 between the arbitrary angle, two foot switch operating free bending work.

Max bending diameter: 25mm
Min bending diameter: 4mm
Motor: 3KW/220V/110V
Weight: 109KGS
Size: 640*640*715mm

Product features:

1. Bend bar dia 4-25mm
2. Automatic, foot pedal control, electric
3. High efficiency, high rotate speed
4. Accurate angle bending, easy to operate.
5. Small size, easy to move, easy to operate.
6. Superior quality, strict quality control

Using methods
1.When the power line connection to the 110V/220V power source and the power indicator light shone on namely mean of the machine operation preparation finishes may go on the normal work.
2.The fixed idler wheel, the move idler wheel and the steel bar adjustment block's spacing needs to make the corresponding adjustment according to the specification of the steel bar.
3.The foot switch connection to point1,2 will make more convenient to go on work .
Point 1, connect to work - angle set by is point 1, press the START switch or point1foot pedal switch control to operation.
Point 2,connect to work, The angle setby is point 2, through the foot switch control operation, this time the point1 angle set by handle must establish with point 2 in the same level angle or is bigger than the point 1 angle . while also after the angle handle setting must fix well the handle nut or when the machine operation will become loose.
4.Adjust the angle that you need by through move Left or right, after angle adjustment is set accurately, assure that angle setting handle is fixed .
5.The operator must stand outside of the rebar bender operation's direction.
6.when press the starting switch or the foot switch will bend the rebar to the angle which you have set
7.when you find some abnormal during the operation you must press down emergency stopped to closes down the machine'operation.
8.sure to remember, when bending processing, the angle of point 1 must be bigger than point 2, otherwise the machine cannot the normal operation.
9.under situation of use foot switch beyond control machine'operation when please through press nearby power light's hand switch test machine whether to revolve judges the foot switch whether to present the breakdown.

Note: 
1. when press the emergency switch to run the machine,the move idler wheel will reture to its position.
2. under the work situation of point 2 bending, the point 1 handle'position must be keep the same level angle with point 2 or to set smaller in the angle 5 degrees than the point 1 and then fix the angle handle, so that not to occure the electricial or the machine misoperation.


Our advantages

At YYTF Machinery Manufacturing, we offer quality products that are subjected to rigorous quality testing measures to ensure that only the best products in terms of quality and design reaches the market. We believe that our clients deal with us because of the quality that we provide and are fully aware of our responsibilities of catering to the various needs and requirements in this regard. 

We have adopted a system of total quality control to ensure that our products conform to strict industry standards and parameters. We use the quality imported parts and materials that are procured from reputed manufacturers. In addition, the different stages of production are closely monitored by our engineers to ensure complete satisfaction of the user of our products.

Timely Delivery

We take pride in our efficient production facilities, it enables us to fulfill different requirements of our clients within the stipulated time frame and as demanded by our clients.

if quality problems cause the user to fail to use the machine, after repair the user still fails to use the machine. We promise to replace the machine with new one after the machine is sold within one month. The expenses generated hereof shall be borne by manufacturer (subject to effective bill). Components and parts (non-consumable parts) are under replacement and warranty within 3 months. If the whole machine suffers major quality problems such as engine body, box, and gear fracture, the warranty period is 6 months. If quick-wear parts of the machine listed in the below table have problems, the quick-wear parts are not in scope of three guarantees. (Remark: effective period is subject to date of invoice.)
--------------------------------------------
We offer quality products that are subjected to rigorous quality testing measures to ensure that only the best products in terms of quality and design reaches the market.
--------------------------------------------
We have adopted a system of total quality control to ensure that our products conform to strict industry standards and parameters.
--------------------------------------------
We believe that our clients deal with us because of the quality that we provide and are fully aware of our responsibilities of catering to the various needs and requirements in this regard.
 

Always be imitated, Never be surpassed!

With 14 years experience, YongYiTongFeng insists in manufacturing small-sized construction machines. As a professional in this field, we pay more attention to quality than on variety. From a small workshop grow to be a professional manufacturer which gains RMB120,000,000.00 annual sales amount, our products cover Southeast Asia, South Asia, Middle East, South America, Africa, which brings us good reputation in global market. Being cautious and conscientious in small construction machines, with the spirit of spatiality and focus, we innovate and lead the steel processing market.
Product packaging and export.
We adopt wooden and iron box to pack steel rod cutter machine, better guarantee the safety and quality of products, we adopt multiple port, multiple exit point.Such as Shanghai, Qingdao, guangdong and other regions.Product transportation will be faster and more convenient.
covered with plastic bag -- protect machine from water.
plastic bag covered with stong waterproof bag -- double protect machine from
water and surface damage.
fix the machien into Iron shelf -- prevent from damage.
carton cover onto the iron shelf -- protect the privacy of clients' goods.
FAQ

Category Advantage

We provide full category of cutting machine, bending machine, straightening machine, stirrup machine, bend-cutting combined machine.
-------------------------------------------------------------------------------------------------------------------------------------

Quality Advantage

Fast cost recovery. The High quality but Mid-range price, durable quality brings you continuous profits.
---------------------------------------------------------------------------------------------------------------------------------------

Technique Advantage

All machines are Fool-Type operation, new users could operate machine in few minutes.
----------------------------------------------------------------------------------------------------------------------------------------

Delivery Advantage

We set logistic center in large cities in China, assures you get machines at first time.
----------------------------------------------------------------------------------------------------------------------------------------

Service Advantage

We have after sales center in all around China, assures the quick reaction and solve problem at first time. Overseas after sales service available, workers could be sent to install machine and train your workers.