China Tungsten Cemented Carbide Bar Drawing Nib for Metal Drawing, Find details about China Tungsten Carbide Wire, Carbide Wire Drawing Die from Tungsten Cemented Carbide Bar Drawing Nib for Metal Drawing
GRADE | DENSITY (g/cm3) | TRS (N/mm2) | HARDNESS (HRA) | Application recommended |
YG11 | 14.4 | 2600 | 88.5 | Forming or stamping dies for metal powders and nonmetal powders. |
YG15 | 14.0 | 2800 | 87.5 | For fabricating drawing dies of steel tubes and rods under High compressibility ratio; punching,stamping,forging tools under large stress. |
YG20 | 13.5 | 3200 | 85.5 | For fabricating of stamping dies for watch parts, spring plates of musical instruments, battery jars, small sized steel balls, screws, screw caps. |
YG16C | 13.9 | 2900 | 85.5 | Impact resistance forging dies. |
G18C | 13.7 | 3100 | 84.5 | Impact resistance forging dies, hot-press forging dies and rollers. |
YG20C | 13.5 | 3300 | 83.5 | Dies for wear resistant or impact resistant application. |
YG22C | 13.3 | 3500 | 83.0 | Nut forming dies and high impact resistance forging dies |
YG25C | 13.1 | 3600 | 82.5 | Stainless bolt header dies and rollers. |
Type | Dimension | Range of applications | ||
d | D | L Range of L | ||
BDP00710- | 0.7 | 10 | 12.0~20.0 | M1 |
BDP01010- | 1.0 | 10 | 12.0~20.0 | M1.5~M2 |
BDP01013- | 1.0 | 13 | 15.4-40.0 | M1.5~M2 |
BDP01213- | 1.2 | 13 | 15.4-40.0 | M1.5~M2 |
BDP01510- | 1.5 | 10 | 12.0~25.0 | M2 |
BDP01516- | 1.5 | 16 | 15.0-45.0 | M2 |
BDP01813- | 1.8 | 13 | 12.0~35.0 | M2.5 |
BDP01816- | 1.8 | 16 | 20.0-45.0 | M2.5 |
BDP02113- | 2.1 | 13 | 15.0~30.0 | M3 |
BDP02116- | 2.1 | 16 | 25.0-45.0 | M3 |
BDP02316- | 2.3 | 16 | 15.0-45.0 | M3 |
BDP02522- | 2.5 | 22 | 20.0-60.0 | M3 |
BDP02813- | 2.8 | 13 | 15.0~30.0 | M4 |
BDP02816- | 2.8 | 16 | 25.0-40.0 | M4 |
BDP02818- | 2.8 | 18 | 20.0-50.0 | M4 |
BDP02820- | 2.8 | 20 | 20.0-50.0 | M4 |
BDP02822- | 2.8 | 22 | 20.0-60.0 | M4 |
BDP02825- | 2.8 | 25 | 20.0-60.0 | M4 |
BDP03216- | 3.2 | 16 | 15.0-45.0 | M4 |
BDP03218- | 3.2 | 18 | 15.0-50.0 | M4 |
BDP03616- | 3.6 | 16 | 20.0-50.0 | M5 |
BDP03618- | 3.6 | 18 | 20.0-60.0 | M5 |
BDP03822- | 3.8 | 22 | 20.0~40.0 | M5 |
BDP03830- | 3.8 | 30 | 50.0~60.0 | M5 |
BDP04218- | 4.2 | 18 | 20.0-60.0 | M5 |
BDP04616- | 4.6 | 16 | 20.0~30.0 | M6 |
BDP04622- | 4.6 | 22 | 35.0~60.0 | M6 |
BDP05422- | 5.4 | 22 | 20.0~60.0 | M6 |
BDP06422- | 6.4 | 22 | 20.0~60.0 | M8 |
BDP06425- | 6.4 | 25 | 20.0~50.0 | M8 |
BDP06430- | 6.4 | 30 | 25.0~60.0 | M8 |
BDP07230- | 7.2 | 30 | 20.0~60.0 | M10 |
BDP08230- | 8.2 | 30 | 20.0~60.0 | M10 |
BDP08235- | 8.2 | 35 | 30.0~60.0 | M10 |
BDP09230- | 9.2 | 30 | 20.0~60.0 | M12 |
BDP10030- | 10.0 | 30 | 20.0~60.0 | M12 |
BDP10035- | 10.0 | 35 | 30.0~60.0 | M12 |
BDP11235- | 11.2 | 35 | 20.0~60.0 | M12 |
BDP11240- | 11.2 | 40 | 20.0~60.0 | M12 |
BDP11835- | 11.8 | 35 | 20.0~60.0 | M14 |
BDP11840- | 11.8 | 40 | 25.0~30.0 | M14 |
BDP13235- | 13.2 | 35 | 25.0~60.0 | M14 |
BDP13240- | 13.2 | 40 | 25.0~50.0 | M14 |
BDP13835- | 13.8 | 35 | 20.0~60.0 | M16 |
BDP13840- | 13.8 | 40 | 25.0~35.0 | M16 |
BDP14445- | 14.4 | 45 | 25.0~60.0 | M16 |
BDP15445- | 15.4 | 45 | 30.0~50.0 | M18 |
BDP16445- | 16.4 | 45 | 25.0~60.0 | M20 |
BDP17445- | 17.4 | 45 | 25.0~60.0 | M20 |
BDP19445- | 19.4 | 45 | 25.0~55.0 | M22 |
BDP21050- | 21.0 | 50 | 25.0~55.0 | M24 |
BDP24460- | 24.4 | 60 | 30.0~50.0 | M27 |
Nominal length | ≤18 | >18-30 | >30-50 | >50 |
Flatness ≤ | 0.30 | 0.35 | 0.40 | 0.55 |
Nominal inner dia. | Nominal length | |||
≤18 | >18-30 | >30-50 | >50 | |
≤6 | 0-0.45 | 0-0.55 | 0-0.65 | - |
>6-10 | 0-0.50 | 0-0.60 | 0-0.70 | 0-0.80 |
>10-14 | 0-0.55 | 0-0.70 | 0-0.80 | 0-0.90 |
>14-18 | 0-0.60 | 0-0.80 | 0-0.90 | 0-1.00 |
>18-24 | 0-0.65 | 0-0.90 | 0-1.00 | 0-1.10 |
>24 | 0-0.70 | 0-1.00 | 0-1.10 | 0-1.20 |
Nominal out diameters | Nominal length | |||
≤18 | >18-30 | >30-50 | >50 | |
≤14 | +0.50 -0.40 | +0.50 -0.40 | +0.60 -0.40 | +0.65 -0.40 |
>14-18 | +0.55 -0.40 | +0.55 -0.40 | +0.60 -0.45 | +0.65 -0.45 |
>18-24 | +0.60 -0.40 | +0.60 -0.40 | +0.65 -0.45 | +0.70 -0.45 |
>24-30 | +0.65 -0.45 | +0.65 -0.45 | +0.70 -0.50 | +0.75 -0.50 |
>30-45 | +0.70 -0.50 | +0.70 -0.50 | +0.75 -0.60 | +0.80 -0.60 |
>44-55 | +0.75 -0.55 | +0.80 -0.60 | +0.85 -0.65 | +0.80 -0.65 |
>55 | - | +0.90 -0.70 | +0.95 -0.75 | +1.00 -0.80 |
Nominal out diameters | Nominal diameters | |||
≤18 | >18-30 | >30-50 | >50 | |
≤14 | +0.50 -0.40 | +0.50 -0.40 | +0.60 -0.40 | +0.65 -0.40 |
>14-18 | +0.55 -0.40 | +0.55 -0.40 | +0.60 -0.45 | +0.65 -0.45 |
>18-24 | +0.60 -0.40 | +0.60 -0.40 | +0.65 -0.45 | +0.70 -0.45 |
>24-30 | +0.65 -0.45 | +0.65 -0.45 | +0.70 -0.50 | +0.75 -0.50 |
>30-45 | +0.70 -0.50 | +0.70 -0.50 | +0.75 -0.60 | +0.80 -0.60 |
>44-55 | +0.75 -0.55 | +0.80 -0.60 | +0.85 -0.65 | +0.80 -0.65 |
>55 | - | +0.90 -0.70 | +0.95 -0.75 | +1.00 -0.80 |